Valworx 570603 electric actuated stainless steel sanitary ball valves are typically used for food, beverage, pharmaceutical, personal care and pet care applications where 3-A sanitary construction is required, as well as for utility, process and corrosive environment applications where quick clamp applications are needed. Highly polished internals (8- 12 Ra finish). Virgin PTFE ball seats and cavity fillers are standard. Triple stem seal design is live-loaded and self-adjusting, compensating for wear, pressure, and temperature fluctuations.
Note: 3A standard 68-00 requires a minimum 1" clearance between valve and actuator. Valworx High Temp kit 588137 can be used to satisfy this requirement.
Ball Valve Standard FeaturesFull Port for Unrestricted Flow 8- 12 Ra finish on all internal surfaces Virgin PTFE ball seats and cavity fillers All materials comply with FDA, USDA and 3-A requirements Triple PTFE/Viton Stem Seal Design, Live Loaded Standard Tri-Clamp ends for sanitary connections Actuator Ready ISO5211 Direct Mounting Pad All valves are tested per MSS-SP82
Electric Actuator Standard FeaturesEPS-Electronic Positioning System with 4-20mA input Quarter turn operation with mechanical limits Rugged Type 4X weatherproof aluminum alloy housing Visual valve position indicator Manual override Heavy duty motor with overload protection Thermostatically controlled anti-condensation heater Analog output signal to confirm valve position Self-locking all metal gear drive, no additional brake required CSA Listed per UL429 and CSA C22.2, CE marked
Options (see Accessories tab)
Note: 3A standard 68-00 requires a minimum 1" clearance between valve and actuator. Valworx High Temp kit 588137 can be used to satisfy this requirement.
Ball Valve Standard Features
Electric Actuator Standard Features
Options (see Accessories tab)
Type
2-Way Electric Actuated 110 VAC EPS-Positioner
Input Control Signal
4-20mA
Pipe Size ~ Tri-Clamp
1-1/2" ~ 1-1/2"
Port Size
Full port, 1.4 inch orifice, Cv 192
Pressure (Max)
1000 PSI WOG
Valve Temperature Range
-50 to 400 °F (-45 to 200 °C)
Actuator Temperature Range
-22 to +140 °F (-30 to +60 °C)
Valve Body/Ball
ASTM 316 stainless steel
Valve Stem
ASTM 316 stainless steel
Internal Finish
8- 12 Ra
Ball Seats
Virgin PTFE
Cavity filler
Virgin PTFE, encapsulated
Stem Seals
PTFE/ Viton, live loaded
Valve Bolts/Nuts
ASTM 304 stainless steel
Cycle Time
30 seconds per 90° rotation (no load)
Duty Cycle
70%
Enclosure
Aluminum alloy, polyester painted, SS fasteners
Enclosure Rating
Type 4X (IP67) weatherproof
Electrical Connections
Terminal strip, 1/2" NPT conduit / cable connector (included)
Valve Position Confirmation
4-20mA output monitoring signal (same type as input signal)
Manual Override
5mm hex drive with protective cover
Motor Protection
Thermal overload
Anti-Condensation Heater
4 watts thermostatically controlled
-
Connectors and CablesPrice: $7.20
Buy 3 or more for $6.48 each
Quantity -
Price: $23.20
Buy 10 or more for $20.88 each
Quantity -
High Temperature Mounting KitPrice: $83.20
Buy 6 or more for $74.88 each
Quantity -
HandwheelsPrice: $28.00
Buy 3 or more for $25.20 each
Quantity
We provide CAD models in virtually every format. Can't find exactly what you're looking for? Please email sales@valworx.com to request the specific files you need. Include the stock number and any accessories with your request.
Generating the model may take a few minutes.
