Valworx 566068C electric actuated 2-piece 150# flanged stainless steel ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. Full port 316 stainless steel investment cast valve mounts between standard ANSI 150 pound pipe flanges. The EPS- Electronic Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the control input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. The valve will remain in the last known position with loss of electric power.
The positioning module is self-calibrating and fully potted to help protect the electronics against vibration and moisture. Valve position can be monitored with onboard analog output signal.
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.
High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Ball Valve Standard Features275 PSI working pressure (see P/T chart) Direct mounting valve per ISO5211 Full port for unrestricted flow 316 stainless steel body, ball and stem Blow out proof stem RTFE ball seats extend cycle life Triple RTFE/Viton stem seal design, live loaded
Electric Actuator Standard FeaturesEPS-Electronic Positioning System with 4-20mA input Quarter turn operation with mechanical limits Rugged Type 4X weatherproof aluminum alloy housing Visual valve position indicator Manual override Heavy duty motor with overload protection Thermostatically controlled anti-condensation heater Analog output signal to confirm valve position Self-locking all metal gear drive, no additional brake required CSA Listed per UL429 and CSA C22.2, CE marked
Options (see Accessories tab)
The positioning module is self-calibrating and fully potted to help protect the electronics against vibration and moisture. Valve position can be monitored with onboard analog output signal.
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.
High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Ball Valve Standard Features
Electric Actuator Standard Features
Options (see Accessories tab)
| Type | Electric Actuated Flange Valve- Positioner |
|---|---|
| Voltage | 110 VAC 50/60 Hz |
| Current Rating | 0.27 A (full load amps) |
| Input Control Signal | 4-20mA |
| Cycle Time | 20 seconds per 90° rotation (no load) |
| Pipe Size | 3/4" ANSI 150# flanged |
| Port Size | Full Port, orifice 0.79 inches, Cv 35 |
| Pressure (Max) | 275 PSI (see P/T chart), 25 PSI saturated steam with high temp kit, vacuum 29inHg |
| Valve Temperature Range | -4 to +356 °F (-20 to +180 °C) |
| Actuator Temperature Range | -13 to 131 °F (-25 to +55 °C) |
| Valve Body | 316 stainless steel |
| Ball | 316 stainless steel |
| Stem Seals | RTFE (reinforced Teflon)/ FKM (Viton) |
| Ball Seats | RTFE (reinforced Teflon) |
| Duty Cycle | 70% |
| Enclosure | Aluminum alloy, polyester painted, SS fasteners |
| Enclosure Rating | Type 4X (IP67) weatherproof |
| Electrical Connections | Terminal strip, 1/2" NPT conduit (optional) / cable connector (included) |
| Valve Position Confirmation | 4-20mA output monitoring signal (same type as input signal) |
| Manual Override | 5mm Hex Drive with protective cover |
| Motor Protection | Thermal overload |
| Anti-Condensation Heater | 4 watts thermostatically controlled |
| Flange Face to Face | ANSI B16.10 Class 150 |
| Flange Dimensions | ANSI B16.5 Class 150 |
| Max Fluid Velocity | 10 feet per second |
-
Connectors and Cables
Conduit Adapter 1/2" NPT for 5618 Series Electric Actuators Stock #: 561890Usually Ships: 4- 6 WeeksPrice: $18.40
Buy 3 or more for $16.56 each
-
Price: $22.40
Buy 10 or more for $20.16 each
-
Price: $42.00
Buy 10 or more for $37.80 each
-
Price: $81.60
Buy 10 or more for $73.44 each
-
High Temperature Mounting Kit
Price: $92.00
Buy 6 or more for $82.80 each
5660 Series Product Data Sheet 5618 Series Electric Actuators with EPS Positioner - Installation InstructionsWe provide CAD models in virtually every format. Can't find exactly what you're looking for? Please email sales@valworx.com to request the specific files you need. Include the stock number and any accessories with your request.
Note: Fusion360 users must have Fusion360 open in order to download.
Note: if you are not seeing a list of CAD formats in the drop down menu, try clearing your browser's cache.
Displaying the model may take a few seconds.
powered by TraceParts
-
3/4" Stainless ANSI 150# Flanged Ball Valve - ISO Direct Mount Stock #: 553006Usually Ships: Same DayPrice: $195.20
Buy 3 or more for $175.68 each
-
Electric Actuator 442 in.lbs (50Nm), 110 VAC, EPS Positioner Stock #: 561856CUsually Ships: Same DayPrice: $920.00
Buy 3 or more for $828.00 each