Electric Actuator Standard FeaturesBrushless motor Quarter turn operation External LED diagnostic light Electronic torque limiter - protects against valve jams Anti-condensation heater Manual override Highly visual dome style position indicator Electrical connections by DIN plug connectors Two auxiliary limit switches to confirm open and closed position Standard ISO5211 multi-flange valve mounting Anti-corrosion resistant IP67 weatherproof enclosure
Valworx 561520 electric actuator uses power-to-open and power-to-close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a flat gear drive system rotates the output drive 90°. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the output drive position.
These electric actuators are typically used to automate quarter turn ball valves, butterfly valves or dampers. Actuator is easy to install using standard ISO5211 multi-flange mounting and double square drive. Electrical wiring via DIN style plug connectors, no need to remove the actuator cover. Two auxiliary dry contact limit switches are provided to confirm open and closed valve position. Thermostatically controlled anti-condensation heater will help protect actuator against damage from condensation. Electronic over torque protection helps prevent damage due to valve jams.
Options for 5615 Actuator (see Accessories tab)
Valworx 561520 electric actuator uses power-to-open and power-to-close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a flat gear drive system rotates the output drive 90°. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the output drive position.
These electric actuators are typically used to automate quarter turn ball valves, butterfly valves or dampers. Actuator is easy to install using standard ISO5211 multi-flange mounting and double square drive. Electrical wiring via DIN style plug connectors, no need to remove the actuator cover. Two auxiliary dry contact limit switches are provided to confirm open and closed valve position. Thermostatically controlled anti-condensation heater will help protect actuator against damage from condensation. Electronic over torque protection helps prevent damage due to valve jams.
Options for 5615 Actuator (see Accessories tab)
| Type | On-Off with DPS Positioner and BSR Failsafe options available |
|---|---|
| Working Rotation | 90° (quarter turn) |
| Max Run Torque | 177 in lbs (20Nm) |
| Max Break Torque | 221 in lbs (25Nm) |
| Voltage | 12 Volt AC/DC (1 ph) |
| Current Rating | 2.28A @ 12VAC, 1.95A @ 12VDC (full load amps) |
| Cycle Time | 9 seconds per 90° rotation (no load, +/- 10%) |
| Duty Cycle | 75% |
| Enclosure | Anti-corrosion polyamide, UV protection, SS fasteners |
| Enclosure Protection | IP67 weatherproof |
| Manual Override | Polyamide knob |
| Motor Type | Brushless |
| Motor Protection | Electronic over-torque |
| Temperature Range | -4 to +158 °F (-20 to +70 °C) |
| Position Indicator | Highly visual dome style |
| Position Confirmation | 2 x SPST limit switches 3A @ 125/250VAC, 30VDC resistive load |
| Anti-Condensation Heater | 4 watts thermostatically controlled |
| ISO5211 Mounting | F03, F04, F05 (multi-flange) |
| Output Drive | 11mm double square (female) |
| Electrical Connections | DIN plugs with cable entry (optional 1/2" conduit plugs or pre-wired cable) |
| Approvals | CE Mark |
-
Digital Positioner System
Price: $389.60
Buy 3 or more for $350.64 each
-
Price: $389.60
Buy 3 or more for $350.64 each
-
Failsafe Battery Kit
Price: $408.80
Buy 3 or more for $367.92 each
-
Connectors & Cables
Price: $5.60
Buy 10 or more for $5.04 each
-
Price: $14.64
Buy 10 or more for $13.18 each
-
Price: $28.07
Buy 10 or more for $25.26 each
-
Price: $20.83
Buy 10 or more for $18.75 each
5615 Series Product Data Sheet 5615 Series On/Off Electric Actuators - Installation Instructions 5615 Series Electric Actuators with DPS Positioner - Installation Instructions
We provide 3D CAD models in Solidworks or STEP file formats for most of our Valworx products.Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.