Valworx 584508 Explosion Proof 3-way Full Port stainless steel ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. These valves have a T-port flow path which can be used as a diverter, selector or mixing valve. There is no flow shutoff position with this type valve. Actuator uses power-to-open (position 2) and power-to-close (position 1), stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via an all metal self-locking gear drive rotates the ball one quarter turn. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.
The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Valworx does not recommend the use of high temperature brackets with explosion proof actuators. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators certified for UL Class I Div I Groups C & D, and are tested to rigorous UL and CSA standards and certified by CSA.
Ball Valve Standard Features1000 PSI working pressure (see P/T chart) Direct mounting valve per ISO5211 Full port design 316 stainless steel body, ball and stem Four ball seat design allows for Full Pressure at any port RTFE ball seats for extended cycle life Triple PTFE/Viton stem seal design, live loaded and adjustable
Electric Actuator Standard FeaturesExplosion proof rated for UL Class I Div I Groups C & D, Ex db IIC T5 Gb Class 1 Zone 1, AEx db IIC T5 Gbs Rugged Type 4X weatherproof aluminum alloy enclosure Visual valve position indicator Manual override Heavy duty motor with overload protection Two auxiliary limit switches to confirm valve positions Self-locking all metal gear drive, no additional brake required CSA Listed per UL429 and CSA C22.2, CE mark as well as ExP ratings listed above
Options (see Accessories tab)
The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Valworx does not recommend the use of high temperature brackets with explosion proof actuators. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators certified for UL Class I Div I Groups C & D, and are tested to rigorous UL and CSA standards and certified by CSA.
Ball Valve Standard Features
Electric Actuator Standard Features
Options (see Accessories tab)
Type | Explosion Proof Electric Actuated 3 Way Diverter Valve- On/Off |
---|---|
Voltage | 24 VDC |
Current Rating | 1.28A (full load amps) |
Cycle Time | 20 seconds per 90° rotation (no load) |
Pipe Size | 1" NPT female |
Port Size | Full Port, orifice 1.0 inches, Cv 32.0 |
Pressure (Max) | 1000 PSI (see P/T chart), vacuum service to 29" Hg |
Valve Temperature Range | -4 to 392 °F (-20 to 200 °C) |
Actuator Temperature Range | -13 to 131 °F (-25 to +55 °C) |
Valve Body | 316 stainless steel |
Ball | 316 stainless steel |
Stem Seals | PTFE (Teflon)/FKM (Viton) |
Ball Seats | RTFE (reinforced Teflon) |
Duty Cycle | 70% |
Enclosure | Aluminum alloy, polyester painted, SS fasteners |
Enclosure Rating | Type 4X (IP67) weatherproof |
Electrical Connections | Two 1/2" NPT threaded ports. Requires Exp rated connector or pipe (not included) |
Valve Position Confirmation | 2 x SPST auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load |
Manual Override | 5mm hex drive with protective cover |
Motor Protection | Thermal overload |
Explosion Proof | UL Class I Div I Groups C & D, Ex db IIC T5 Gb Class 1 Zone 1, AEx db IIC T5 Gb |
Max Fluid Velocity | 10 feet per second |
-
Price: $22.94
Buy 3 or more for $20.65 each
Quantity
![](/images/uploads/pdf.png)
![](/images/uploads/pdf.png)
![](/images/uploads/pdf.png)
We provide CAD models in virtually every format. Can't find exactly what you're looking for? Please email sales@valworx.com to request the specific files you need. Include the stock number and any accessories with your request.
Note: Fusion360 users must have Fusion360 open in order to download.
Note: if you are not seeing a list of CAD formats in the drop down menu, try clearing your browser's cache.
Displaying the model may take a few seconds.
powered by TraceParts