3/4" Electric 3-way Brass L-Port Valve 110 VAC, EPS Positioner

Stock #: 562106
Brand: Valworx
Series: 5621
List Price: $1364.00
Price: $1,091.20
Buy 3 or more for $982.08 each
Usually Ships: Same Day
Free Shipping on orders over $99
Valworx 562106 electric actuated L-port brass valves can be used as a diverter or selector valve to control the flow of water, air, oil, and other media compatible with the materials of construction. Four ball seat design allows for full pressure at any port. Ideal where lead free and NSF approved construction are required for potable drinking water or other general industrial applications. The EPS- Electronic Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the control input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. The valve will remain in the last known position with loss of electric power. There is no flow shutoff position with this type valve.

The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation. Two auxiliary limit switches are provided to confirm valve position.

High performance ball and stem are made of 316 stainless steel rather than the typical plated brass. Energized PTFE ball seats are designed for low torque and extended cycle life. These ball valves offer a unique triple PTFE/Viton leak free stem seal design.

High temperature valve mounting kit available for extended temperature range or wall mounting applications. Suitable for vacuum to 29 inch Hg.

Ball Valve Standard Features
  • Full Port design
  • Lead free brass body
  • 400 PSI working pressure (see P/T chart)
  • Direct mounting valve per ISO5211
  • Stainless steel ball and stem
  • Four ball seat design allows for full pressure at any port
  • Energized PTFE ball seats for extended cycle life and reduced torque
  • Leak free triple PTFE/Viton stem seal design
  • Certified per NSF372 and NSF61 for use with potable/drinking water

    Electric Actuator Standard Features
  • EPS-Electronic Positioning System with 4-20mA input
  • Quarter turn operation with mechanical limits
  • Rugged Type 4X weatherproof aluminum alloy housing
  • Visual valve position indicator
  • Manual override
  • Heavy duty motor with overload protection
  • Thermostatically controlled anti-condensation heater
  • Analog output signal to confirm valve position
  • Self-locking all metal gear drive, no additional brake required
  • CSA Listed per UL429 and CSA C22.2, CE marked

  • Options (see Accessories tab)
    TypeElectric Actuated 3 Way Brass Valve- Positioner
    Voltage110 VAC 50/60 Hz
    Current Rating0.27A (full load amps)
    Input Control Signal4-20mA
    Cycle Time21 seconds per 90° rotation (no load)
    Pipe Size3/4" NPT female
    Port SizeFull Port, orifice 0.75 inches, Cv 10
    Pressure (Max)400 PSI (see P/T chart),
    25 PSI saturated steam with high temp. kit, vacuum service to 29" Hg
    Valve Temperature Range-4 to 344 °F (-20 to +173 °C)
    Actuator Temperature Range-13 to +131 °F (-25 to +55 °C)
    Valve BodyLead Free Brass C69300
    Ball and Stem316 stainless steel
    Stem Seals PTFE (Teflon) with dual FKM (Viton) seals
    Ball Seats(4) PTFE (Teflon) energized with FKM (Viton)
    Duty Cycle70%
    EnclosureAluminum alloy, polyester painted, SS fasteners
    Enclosure RatingType 4X (IP67) weatherproof
    Electrical ConnectionsTerminal strip, 1/2" NPT conduit (optional) / cable connector (included)
    Valve Position Confirmation4-20mA output monitoring signal (same type as input signal)
    Manual Override5mm hex drive with protective cover
    Motor ProtectionThermal overload
    Anti-Condensation Heater4 watts thermostatically controlled
    Max Fluid Velocity10 feet per second
    • Connectors and Cables
      Conduit Adapter 1/2
      Conduit Adapter 1/2" NPT for 5618 Series Electric Actuators Stock #: 561890
      Usually Ships: 2- 3 Weeks
      Price: $18.40
      Buy 3 or more for $16.56 each
      Quantity
    • 7-Conductor Cable for 5618 Series Electric Actuators- 8ft
      7-Conductor Cable for 5618 Series Electric Actuators- 8ft Stock #: 588008A
      Usually Ships: Same Day
      Price: $22.40
      Buy 10 or more for $20.16 each
      Quantity
    • 7-Conductor Cable for 5618 Series Electric Actuators- 16ft
      7-Conductor Cable for 5618 Series Electric Actuators- 16ft Stock #: 588009A
      Usually Ships: Same Day
      Price: $42.00
      Buy 10 or more for $37.80 each
      Quantity
    • 7-Conductor Cable for 5618 Series Electric Actuators- 32ft
      7-Conductor Cable for 5618 Series Electric Actuators- 32ft Stock #: 588010A
      Usually Ships: Same Day
      Price: $81.60
      Buy 10 or more for $73.44 each
      Quantity
    • High Temperature Mounting Kit
      High Temp/Wall Mounting Kit F05/07-14x11mm
      High Temp/Wall Mounting Kit F05/07-14x11mm Stock #: 588136
      Usually Ships: Same Day
      Price: $96.80
      Buy 6 or more for $87.12 each
      Quantity

    We provide CAD models in virtually every format. Can't find exactly what you're looking for? Please email sales@valworx.com to request the specific files you need. Include the stock number and any accessories with your request.

    Note: Fusion360 users must have Fusion360 open in order to download.

    Note: if you are not seeing a list of CAD formats in the drop down menu, try clearing your browser's cache.

     

    Download CAD files
    CAD Format:

    Displaying the model may take a few seconds.
    powered by TraceParts