1-1/2" Electric 3-way Brass T-Diverter Valve 110 VAC

Stock #: 567912C
Series: 5679
List Price: $965
Price: $772.00
Buy 3 or more for $694.80 each
Usually Ships: Same Day
-
+
Valworx 567912C electric actuated 3-way FULL PORT lead free ball valves are used to control the flow of water, air, oil, and other media compatible with the materials of construction. These 3-way T-Port valves are typically used as a flow diverter valve. Four ball seat design allows for full pressure at any port. Ideal where lead free and NSF approved construction are required for potable drinking water or other general industrial applications. Actuator uses power-to-open (position 2) and power-to-close (position 1), stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via an all metal self-locking gear drive rotates the ball one quarter turn. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position. There is no flow shutoff position with this type valve.

The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation. Two auxiliary limit switches are provided to confirm valve position.

High performance ball and stem are made of 316 stainless steel rather than the typical plated brass. Energized PTFE ball seats are designed for low torque and extended cycle life. These ball valves offer a unique triple PTFE/Viton leak free stem seal design.

High temperature valve mounting kit available for extended temperature range or wall mounting applications. Suitable for vacuum to 29 inch Hg.

Ball Valve Standard Features
  • Full Port design
  • Lead free brass body
  • 400 PSI working pressure (see P/T chart)
  • Direct mounting valve per ISO5211
  • Stainless steel ball and stem
  • Four ball seat design allows for full pressure at any port
  • Energized PTFE ball seats for extended cycle life and reduced torque
  • Leak free triple PTFE/Viton stem seal design
  • Certified per NSF372 and NSF61 for use with potable/drinking water

    Electric Actuator Standard Features
  • Quarter turn operation with mechanical limits
  • Rugged Type 4X weatherproof aluminum alloy housing
  • Visual valve position indicator
  • Manual override
  • Heavy duty motor with overload protection
  • Thermostatically controlled anti-condensation heater
  • Two auxiliary limit switches to confirm valve position
  • Self-locking all metal gear drive, no additional brake required
  • CSA Listed per UL429 and CSA C22.2, CE mark
  • TypeElectric Actuated 3 Way Brass Valve- On/Off
    Voltage110 VAC 50/60 Hz
    Current Rating0.27A (full load amps)
    Cycle Time21 seconds per 90° rotation (no load)
    Pipe Size1-1/2" NPT female
    Port SizeFull Port, orifice 1.5 inches, Cv 49
    Pressure (Max)400 PSI (see P/T chart),
    25 PSI saturated steam with high temp. kit, vacuum service to 29" Hg
    Valve Temperature Range-4 to 344 °F (-20 to +173 °C)
    Actuator Temperature Range-13 to +131 °F (-25 to +55 °C)
    Valve BodyLead Free Brass C69300
    Ball and Stem316 stainless steel
    Stem Seals PTFE (Teflon) with dual FKM (Viton) seals
    Ball Seats(4) PTFE (Teflon) energized with FKM (Viton)
    Duty Cycle70%
    EnclosureAluminum alloy, polyester painted, SS fasteners
    Enclosure RatingType 4X (IP67) weatherproof
    Electrical ConnectionsTerminal strip, 1/2" NPT conduit (optional) / cable connector (included)
    Valve Position Confirmation2 x SPST auxiliary limit switches rated 3A@121/210VAC,30VDC resistive load
    Manual Override5mm hex drive with protective cover
    Motor ProtectionThermal overload
    Anti-Condensation Heater4 watts thermostatically controlled
    Max Fluid Velocity10 feet per second
    High Temperature Mounting Kit
    High Temp/Wall Mounting Kit F05/07-14x14mm
    High Temp/Wall Mounting Kit F05/07-14x14mm Stock #: 588137
    Usually Ships: Same Day
    Price: $106.40

    Buy 3 or more for $95.76 each

    Quantity :
    Quick Close Option
    Quick Close Option- 50Nm 110 VAC 4s
    Quick Close Option- 50Nm 110 VAC 4s Stock #: A561850QC
    Usually Ships: Same Day
    Price: $166.40

    Quantity :
    Connectors and Cables
    Conduit Adapter 1/2
    Conduit Adapter 1/2" NPT for 5618 Series Electric Actuators Stock #: 561890
    Usually Ships: 6- 8 Weeks
    Price: $18.40

    Buy 3 or more for $16.56 each

    Quantity :
    7-Conductor Cable for 5618 Series Electric Actuators- 8ft
    7-Conductor Cable for 5618 Series Electric Actuators- 8ft Stock #: 588008A
    Usually Ships: Same Day
    Price: $26.80

    Buy 10 or more for $24.12 each

    Quantity :
    7-Conductor Cable for 5618 Series Electric Actuators- 16ft
    7-Conductor Cable for 5618 Series Electric Actuators- 16ft Stock #: 588009A
    Usually Ships: Same Day
    Price: $50.40

    Buy 10 or more for $45.36 each

    Quantity :
    7-Conductor Cable for 5618 Series Electric Actuators- 32ft
    7-Conductor Cable for 5618 Series Electric Actuators- 32ft Stock #: 588010A
    Usually Ships: Same Day
    Price: $97.60

    Buy 10 or more for $87.84 each

    Quantity :