Valworx 541606 air actuated 3-way lead free brass ball valves are designed for use with air, water, oil, and other media compatible with the materials of construction. These T-port ball valves are typically used as a diverter valve. Ideal where lead free and NSF approved construction are required for potable drinking water as well as other industrial applications. Double acting actuators use an air pressure signal (58- 87 PSI) to change the valve to position 1 or position 2. There is no flow shutoff position with this type valve. Actuator has standard ISO/Namur interface for mounting optional direct mount solenoid valve and other accessories. These actuated ball valves can be mounted in any orientation. High temperature valve mounting kit available for extended temperature range or wall mounting applications. Suitable for steam up to 50 PSI max. with kit and vacuum service to 29 inch Hg.
Advantages of air actuated ball valves over other type valves may include: higher flow rates, higher pressures, higher temperatures, wider media compatibility, straight through flow path, reduced water hammer, and use in hazardous environments.
Ball Valve Standard FeaturesDirect mount lead free brass valve Full Port for unrestricted flow 316 stainless steel ball and stem Four ball seat design allows for full pressure at any port Energized PTFE ball seats for extended cycle life and reduced torque Leak free triple PTFE/Viton stem seal design Certified per NSF372 and NSF61 for use with potable/drinking water
Air Actuator Standard FeaturesExtended cycle life (1 million cycles) Rugged quarter turn scotch yoke design Weatherproof type IP66 & IP68 actuator Highly visible valve position indicator Dry or lubricated pilot air Factory lubricated for normal life Anodized aluminum body with polyester coated end covers ISO/Namur mounting for valve and accessories
Options (see Accessories tab)
Advantages of air actuated ball valves over other type valves may include: higher flow rates, higher pressures, higher temperatures, wider media compatibility, straight through flow path, reduced water hammer, and use in hazardous environments.
Ball Valve Standard Features
Air Actuator Standard Features
Options (see Accessories tab)
Type | Air Actuated 3 Way Brass Valve- Double Acting |
---|---|
Pipe Size | 3/4" NPT female |
Port Size | Full Port, orifice 0.75 inches, Cv 10.0 |
Valve Pressure Rating | 400 PSI (see P/T chart), 25 PSI saturated steam with high temp. kit, vacuum service to 29" Hg |
Valve Temperature Rating | -4 to 344 °F (-20 to 173 °C) |
Actuator Temperature Rating | -4 to 167 °F (-18 to 75 °C) |
Valve Body | Lead Free Brass C69300 |
Ball and Stem | 316 Stainless steel |
Stem Seals | PTFE (Teflon) with dual FKM (Viton) seals |
Ball Seats | (4) PTFE (Teflon) energized with FKM (Viton) |
Cycle Time | Approx. 0.3 seconds per 90° rotation |
Air Pilot Pressure | 58-87 PSI (4- 6 bar) |
Maximum Air Pilot Pressure | 120 PSI (8 bar) |
Air Connections | 1/4" NPT (plus NAMUR pad for solenoid valve) |
Actuator Seals | NBR |
-
Price: $100.80
Buy 10 or more for $90.72 each
Quantity -
Price: $100.80
Buy 10 or more for $90.72 each
Quantity -
Price: $27.08
Buy 10 or more for $24.37 each
Quantity -
Limit SwitchPrice: $145.60
Buy 6 or more for $131.04 each
Quantity -
Digital Smart Positioner
-
Price: $1,056.40
Quantity -
High Temperature Mounting KitPrice: $86.40
Buy 6 or more for $77.76 each
Quantity
5416/5417 Series Product Data Sheet
5320/5321 Series Pneumatic Actuators - Installation Instructions
5320/5321 Series Explosion Proof Certificate of Compliance
IAPMO Certification to NSF/ANSI 61 Potable Drinking Water
IAPMO Certification to NSF/ANSI 372 Lead Free
5320/5321 Series Pneumatic Actuators - Installation Instructions
5320/5321 Series Explosion Proof Certificate of Compliance
IAPMO Certification to NSF/ANSI 61 Potable Drinking Water
IAPMO Certification to NSF/ANSI 372 Lead Free
We provide CAD models in virtually every format. Can't find exactly what you're looking for? Please email sales@valworx.com to request the specific files you need. Include the stock number and any accessories with your request.
Note: Fusion360 users must have Fusion360 open in order to download.
Note: if you are not seeing a list of CAD formats in the drop down menu, try clearing your browser's cache.
Displaying the model may take a few seconds.
powered by TraceParts