Valworx 568002E electric actuated lead free brass ball valve is used for on-off control of water, air, oil, and other media compatible with the materials of construction. Ideal where lead free and NSF construction are required for potable drinking water as well as other industrial applications. Standard unit is power-to-open and power to close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a self locking flat gear drive, rotates the ball. The motor is stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.
The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation. Two limit switches are provided to confirm valve position. Manual override can be used to operate valve during setup or with loss of electrical power.
High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Ball Valve Standard Features
Direct mount lead free brass valveFull Port for unrestricted flow316 stainless steel ball and stemEnergized PTFE ball seats for lower torque and extended cycle lifeLeak free triple PTFE/Viton stem seal designCertified per NSF372 and NSF61 for use with potable/drinking water
Electric Actuator Standard FeaturesLED light gives continuous actuator status indicationMulti-voltage capable with auto-voltage sensingElectronic torque limiter - protects against valve jamsAnti-condensation heaterManual override with visual valve position indicatorElectrical connections via external DIN plugs (included)Two dry contact limit switches used to confirm open/closed valve positionIP67 weatherproof enclosure, CE marked
Options (see Accessories tab)
| Type | Electric Actuated Brass Ball Valve- Multivoltage |
|---|
| Voltage | 24 to 240 Volts AC/DC (1 ph,50/60Hz) auto-voltage sensing |
|---|
| Current Rating | 0.3A @ 110VAC, 0.16A @ 240VAC, 1.28A @ 24VAC
0.97A @ 24VDC (full load amps) |
|---|
| Cycle Time | 9 seconds per 90° rotation (+/-10% no load) |
|---|
| Pipe Size | 1/4" NPT female |
|---|
| Port Size | Full Port, orifice 0.39 inches, Cv 8 |
|---|
| Pressure Rating | 600 PSI (see P/T chart),
25 PSI saturated steam with high temp kit, vacuum service to 29" Hg |
|---|
| Valve Temperature Range | 4 to 366°F (-20 to 185°C) |
|---|
| Actuator Temperature Range | -4 to 158°F (-20 to 70°C) |
|---|
| Valve Body | Lead Free Brass C69300 |
|---|
| Ball and Stem | 316 stainless steel |
|---|
| Ball Seats | PTFE (Teflon) energized with FKM (viton) |
|---|
| Stem Seals | PTFE (Teflon) with dual FKM (Viton) seals |
|---|
| Duty Cycle | 75% |
|---|
| Enclosure | Anti-corrosive polyamide, SS fasteners |
|---|
| Enclosure Rating | IP67 weatherproof, UV protection |
|---|
| Electrical Connections | DIN plugs with cable entry (included), optional 1/2" conduit plugs |
|---|
| Valve Position Confirmation | 2 x SPST auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load |
|---|
| Manual Override | Hand knob |
|---|
| Motor Protection | Electronic over-torque with LED status light |
|---|
| Anti-Condensation Heater | 4 watts thermostatically controlled |
|---|
| Max Fluid Velocity | 10 feet per second |
|---|
Digital Positioner System
Price: $389.60
Buy 3 or more for $350.64 each
Price: $389.60
Buy 3 or more for $350.64 each
Failsafe Battery Kit
Price: $408.80
Buy 3 or more for $367.92 each
Price: $408.80
Buy 3 or more for $367.92 each
Connectors & Cables
Price: $5.60
Buy 10 or more for $5.04 each
Price: $14.64
Buy 10 or more for $13.18 each
Price: $28.07
Buy 10 or more for $25.26 each
Price: $20.83
Buy 10 or more for $18.75 each
High Temperature Mounting Kit
Price: $85.60
Buy 3 or more for $77.04 each
