2-1/2" Electric Actuated Brass Ball Valve 24 VDC, EPS Positioner

Stock #: 567673C
Brand: Valworx
Series: 5676
List Price: $1620.00
Price: $1,296.00
Buy 3 or more for $1,166.40 each
Usually Ships: Same Day
Free Shipping on orders over $99
Valworx 567673C electric actuated lead free brass ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. Ideal where lead free and NSF construction are required for potable drinking water as well as other industrial applications. The EPS- Electronic Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. Valve can be set to fail closed, in-place or open with loss of control signal. The valve will remain in the last known position with loss of electric power.

The positioning module is self-calibrating and fully potted to help protect the electronics against vibration and moisture. Valve position can be monitored with onboard analog output signal.

The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.

High temperature valve mounting kit available for extended temperature range or wall mounting applications.

Ball Valve Standard Features
  • Lead free brass body
  • 300 PSI working pressure (see P/T chart)
  • Direct mount ball valve per ISO5211
  • Full port design for unrestricted flow
  • 316 Stainless steel ball and stem
  • Blow out proof stem
  • Energized PTFE ball seats for lower torque and extended cycle life
  • Leak free triple PTFE/Viton stem seal packing
  • Certified per NSF372 and NSF 61 for potable/drinking water

  • Electric Actuator Standard Features
  • EPS-Electronic Positioning System with 4-20mA input
  • Quarter turn operation with mechanical limits
  • Rugged Type 4X weatherproof aluminum alloy housing
  • Visual valve position indicator
  • Manual override
  • Heavy duty motor with overload protection
  • Thermostatically controlled anti-condensation heater
  • Analog output signal to confirm valve position
  • Self-locking all metal gear drive, no additional brake required
  • CSA Listed per UL429 and CSA C22.2, CE marked

  • Options (see Accessories tab)
    TypeElectric Actuated Brass Ball Valve- Positioner
    Voltage24 VDC
    Current Rating1.0A (full load amps)
    Input Control Signal4-20mA
    Cycle Time20 seconds per 90° rotation (no load)
    Pipe Size2-1/2" NPT female
    Port SizeFull Port, orifice 2.50 inches, Cv 320
    Pressure (Max)300 PSI (see P/T chart),
    25 PSI saturated steam with high temp kit, vacuum service to 29" Hg
    Valve Temperature Range-4 to 366 °F (-20 to 185 °C)
    Actuator Temperature Range-13 to +131 °F (-25 to +55 °C)
    Valve BodyLead Free Brass
    Ball and Stem316 stainless steel
    Ball SeatsPTFE (Teflon) energized with FKM (viton)
    Stem Seals PTFE (Teflon) with dual FKM (viton) seals
    Duty Cycle70%
    EnclosureAluminum alloy, polyester coating, SS fasteners
    Enclosure RatingType 4X (IP67) weatherproof
    Electrical ConnectionsTerminal strip, 1/2" NPT conduit / cable connector (included)
    Valve Position Confirmation4-20mA output monitoring signal (same type as input signal)
    Manual Override5mm hex drive with protective cover
    Motor ProtectionCurrent sensor
    Anti-Condensation Heater4 watts thermostatically controlled
    Max Fluid Velocity10 feet per second
    • Connectors and Cables
      Conduit Adapter 1/2
      Conduit Adapter 1/2" NPT for 5618 Series Electric Actuators Stock #: 561890
      Usually Ships: 4- 6 Weeks
      Price: $18.40
      Buy 3 or more for $16.56 each
      Quantity
    • 7-Conductor Cable for 5618 Series Electric Actuators- 8ft
      7-Conductor Cable for 5618 Series Electric Actuators- 8ft Stock #: 588008A
      Usually Ships: Same Day
      Price: $22.40
      Buy 10 or more for $20.16 each
      Quantity
    • 7-Conductor Cable for 5618 Series Electric Actuators- 16ft
      7-Conductor Cable for 5618 Series Electric Actuators- 16ft Stock #: 588009A
      Usually Ships: Same Day
      Price: $42.00
      Buy 10 or more for $37.80 each
      Quantity
    • 7-Conductor Cable for 5618 Series Electric Actuators- 32ft
      7-Conductor Cable for 5618 Series Electric Actuators- 32ft Stock #: 588010A
      Usually Ships: Same Day
      Price: $81.60
      Buy 10 or more for $73.44 each
      Quantity
    • High Temperature Mounting Kit
      High Temp/Wall Mounting Kit F05/07-14x14mm
      High Temp/Wall Mounting Kit F05/07-14x14mm Stock #: 588137
      Usually Ships: Same Day
      Price: $106.40
      Buy 6 or more for $95.76 each
      Quantity

    We provide CAD models in virtually every format. Can't find exactly what you're looking for? Please email sales@valworx.com to request the specific files you need. Include the stock number and any accessories with your request.

    Note: Fusion360 users must have Fusion360 open in order to download.

    Note: if you are not seeing a list of CAD formats in the drop down menu, try clearing your browser's cache.

     

    Download CAD files
    CAD Format:

    Displaying the model may take a few seconds.
    powered by TraceParts