Valworx 567652C electric actuated lead free brass ball valve is used for on-off control of water, air, oil, and other media compatible with the materials of construction. Ideal where lead free and NSF construction are required for potable drinking water as well as other industrial applications. These actuated valves use power-to-open and power to close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a self-locking all metal gear drive rotates the ball. The motor is stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.
High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Ball Valve Standard FeaturesLead free brass body 600 PSI working pressure (see P/T chart) Direct mount ball valve per ISO5211 Full port design for unrestricted flow 316 Stainless steel ball and stem Blow out proof stem Energized PTFE ball seats for lower torque and extended cycle life Leak free triple PTFE/Viton stem seal packing Certified per NSF372 and NSF 61 for potable/drinking water
Electric Actuator Standard FeaturesQuarter turn operation with mechanical stops Rugged Type 4X weatherproof aluminum alloy enclosure Visual valve position indicator Manual override Heavy duty motor with overload protection Thermostatically controlled anti-condensation heater Two auxiliary limit switches to confirm valve positions Self-locking all metal gear drive, no additional brake required CSA Listed per UL429 and CSA C22.2, CE mark
Options (see Accessories tab)
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.
High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Ball Valve Standard Features
Electric Actuator Standard Features
Options (see Accessories tab)
| Type | Electric Actuated Brass Ball Valve- On/Off |
|---|---|
| Voltage | 24 VDC |
| Current Rating | 1.28A (full load amps) |
| Cycle Time | 20 seconds per 90° rotation (no load) |
| Pipe Size | 2" NPT female |
| Port Size | Full Port, orifice 2.0 inches, Cv 240 |
| Pressure Rating | 600 PSI (see P/T chart), 25 PSI saturated steam with high temp kit, vacuum service to 29" Hg |
| Valve Temperature Range | -4 to 366 °F (-20 to +185 °C) |
| Actuator Temperature Range | -13 to +131 °F (-25 to +55 °C) |
| Valve Body | Lead Free Brass C69300 |
| Ball and Stem | 316 stainless steel |
| Ball Seats | PTFE (Teflon) energized with FKM (viton) |
| Stem Seals | PTFE (Teflon) with dual FKM (Viton) seals |
| Duty Cycle | 70% |
| Enclosure | Aluminum alloy, polyester coating, SS fasteners |
| Enclosure Rating | Type 4X (IP67) weatherproof |
| Electrical Connections | Terminal strip, 1/2" NPT conduit (optional) / cable connector (included) |
| Valve Position Confirmation | 2 x SPST auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load |
| Manual Override | 5mm hex drive with protective cover |
| Motor Protection | Thermal overload |
| Anti-Condensation Heater | 4 watts thermostatically controlled |
| Max Fluid Velocity | 10 feet per second |
-
Connectors and Cables
Price: $18.40
Buy 3 or more for $16.56 each
-
Price: $26.80
Buy 10 or more for $24.12 each
-
Price: $50.40
Buy 10 or more for $45.36 each
-
Price: $97.60
Buy 10 or more for $87.84 each
-
High Temperature Mounting Kit
Price: $96.80
Buy 6 or more for $87.12 each
5676 Series Product Data Sheet 5676 Quick Close Series Product Data Sheet 5618 Series On/Off Electric Actuators - Installation Instructions IAPMO Certification to NSF/ANSI 61 Potable Drinking Water IAPMO Certification to NSF/ANSI 372 Lead Free We provide CAD models in virtually every format. Can't find exactly what you're looking for? Please email sales@valworx.com to request the specific files you need. Include the stock number and any accessories with your request.
Note: Fusion360 users must have Fusion360 open in order to download.
Note: if you are not seeing a list of CAD formats in the drop down menu, try clearing your browser's cache.
Displaying the model may take a few seconds.
powered by TraceParts
-
Price: $229.67
Buy 3 or more for $206.70 each
-
Price: $544.00
Buy 3 or more for $489.60 each