Valworx 541016 air actuated lead free brass ball valves are used for on-off control of air, water, oil, and other media compatible with the materials of construction. Ideal where lead free and NSF approved construction are required for potable drinking water as well as other industrial applications. Double acting actuators use an air pressure signal (58- 87 PSI) to open and close the valve. Actuator has standard ISO/Namur interface for mounting optional direct mount solenoid valve and other accessories. These actuated ball valves can be mounted in any orientation. High temperature valve mounting kit available for extended temperature range or wall mounting applications. Suitable for steam up to 50 PSI max. with kit and vacuum service to 29 inch Hg.
Advantages of air actuated ball valves over other type valves may include: higher flow rates, higher pressures, higher temperatures, wider media compatibility, straight through flow path, reduced water hammer, and use in hazardous environments.
Ball Valve Standard Features
Direct mount lead free brass valveFull Port for unrestricted flow316 stainless steel ball and stemEnergized PTFE ball seats for lower torque and extended cycle lifeLeak free triple PTFE/Viton stem seal designCertified per NSF372 and NSF61 for use with potable/drinking water
Air Actuator Standard FeaturesExtended cycle life (1 million cycles)Rugged quarter turn scotch yoke designWeatherproof type IP66 & IP68 actuatorHighly visible valve position indicatorFactory lubricated for normal lifeAnodized aluminum body with polyester coated end coversISO/Namur mounting for valve and accessories
Options (see Accessories tab)
| Type | Air Actuated Brass Ball Valve- Double Acting |
|---|
| Pipe Size | 2" NPT female |
|---|
| Port Size | Full Port, orifice 2.00 inches, Cv 240 |
|---|
| Valve Pressure Rating | 600 PSI (see P/T chart),
25 PSI saturated steam with high temp kit, vacuum service to 29" Hg |
|---|
| Valve Temperature Rating | -4 to 366 °F (-20 to 186 °C) |
|---|
| Actuator Temperature Rating | -4 to 167 °F (-4 to 75 °C) |
|---|
| Valve Body | Lead Free Brass C69300 |
|---|
| Ball and Stem | 316 Stainless steel |
|---|
| Stem Seals | PTFE (Teflon) with dual FKM (Viton) seals |
|---|
| Ball Seats | PTFE (Teflon) energized with FKM (Viton) |
|---|
| Cycle Time | Approx. 0.3 seconds per 90° rotation |
|---|
| Air Pilot Pressure | 58-87 PSI (4- 6 bar) |
|---|
| Maximum Air Pilot Pressure | 120 PSI (8 bar) |
|---|
| Air Connections | 1/4" NPT (plus NAMUR pad for solenoid valve) |
|---|
| Actuator Seals | NBR |
|---|
Direct Mount Solenoid Valves
Price: $100.80
Buy 3 or more for $90.72 each
Price: $100.80
Buy 3 or more for $90.72 each
Price: $27.08
Buy 10 or more for $24.37 each
Limit Switch
Price: $145.60
Buy 3 or more for $131.04 each
Digital Smart Positioner
High Temperature Mounting Kit
Price: $92.00
Buy 3 or more for $82.80 each
