2" Electric Actuated Butterfly Valve, Wafer, EPDM, 110 VAC, EPS Positioner

Stock #: 567102C
Series: 5671
List Price: $1478
Price: $1,182.40
Buy 3 or more for $1,064.16 each
Usually Ships: Same Day
-
+
Valworx 567102C electric actuated soft seated butterfly valve is used to control the flow of water and other media compatible with the materials of construction. Wafer style valve sandwich mounts between customer supplied standard ANSI/ASME Class 150 and other international standard flanges. The EPS- Electronic Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the control input signal results in a corresponding and proportional change in the position of the disc. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. The valve will remain in the last known position with loss of electric power. EPS positioning module is self-calibrating and fully potted to help protect the electronics against vibration and moisture. Valve position can be monitored with the onboard analog output signal.

The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Actuator has a rugged unique integral motor/housing design which provides higher torque in a very small package. Special wave line seat and disc shape, reduces the required torque and extends the life of the valve. Precision machined 316SS disc with two-piece stem (shaft) construction, enhances the flow capacity of the valve and reduces turbulence. The stem shaft utilizes PTFE/graphite bearings with V-ring seals to preventing leakage.

Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.

Modbus control is available as a factory-installed option. Click on the Accessories tab for details.

Butterfly Valve Standard Features
  • Rugged ductile iron body with epoxy coating
  • Precision machined 316 Stainless Steel disc
  • Unique wave line seat design reduces the torque and extends the seal life
  • PTFE/graphite stem bearings with V-ring seals
  • Two piece stem/disc construction enhances flow and reduces turbulence
  • Standard ISO5211 actuator to valve direct mounting
  • Leak proof flange seals included as part of valve seat

  • Electric Actuator Standard Features
  • EPS-Positioner controlled by a 4-20mA input
  • Quarter turn operation with mechanical limits
  • Rugged Type 4X weatherproof aluminum alloy housing
  • Visual valve position indicator
  • Manual override
  • Heavy duty motor with overload protection
  • Thermostatically controlled anti-condensation heater
  • Analog output signal to confirm valve position
  • Self-locking all metal gear drive, no additional brake required
  • CSA Listed per UL429 and CSA C22.2, CE mark
  • TypeElectric Actuated Wafer Butterfly Valve- Positioner
    Voltage110 VAC 50/60 Hz
    Current Rating0.27 A (full load amps)
    Input Control Signal4-20mA
    Cycle Time21 seconds per 90° rotation (no load)
    Pipe Size2 inch (DN50)
    Suitable FlangesANSI /ASME B16.5 Class 150, B16.1 Class 125, EN1092 PN10, PN16, BS10 D, E, JIS B2239 10K, 16K
    Flow FactorCv 124 (Cv = number of GPM of 60 °F water at 1 psi pressure drop)
    Pressure Rating232 PSI (16 Bar), 29 inHg vacuum
    Valve Temperature Range0 to 248 °F (-30 to +120 °C)
    Actuator Temperature Range-13 to +131 °F (-25 to +55 °C)
    Valve BodyDuctile iron, epoxy coating (seat facing acts as flange gasket)
    Disc316 stainless steel
    Disc Seat/Liner EPDM
    Shaft SealsEPDM V-ring
    Duty Cycle70%
    EnclosureAluminum alloy, polyester painted, SS fasteners
    Enclosure RatingType 4X (IP67) weatherproof
    Electrical ConnectionsTerminal strip, 1/2"NPT conduit (optional) / cable connector (included)
    Valve Position Confirmation4-20mA output monitoring signal (same type as input signal)
    Manual Override5mm hex drive with protective cover
    Motor ProtectionThermal overload
    Anti-Condensation Heater4 watts thermostatically controlled
    Modbus Control System
    A5618 Modbus Control Module for 561856C
    A5618 Modbus Control Module for 561856C Stock #: A5618MXX02
    Usually Ships: Same Day
    Price: $277.92

    Quantity :
    Connectors and Cables
    Conduit Adapter 1/2
    Conduit Adapter 1/2" NPT for 5618 Series Electric Actuators Stock #: 561890
    Usually Ships: Same Day
    Price: $18.40

    Buy 3 or more for $16.56 each

    Quantity :
    7-Conductor Cable for 5618 Series Electric Actuators- 8ft
    7-Conductor Cable for 5618 Series Electric Actuators- 8ft Stock #: 588008A
    Usually Ships: Same Day
    Price: $26.80

    Buy 10 or more for $24.12 each

    Quantity :
    7-Conductor Cable for 5618 Series Electric Actuators- 16ft
    7-Conductor Cable for 5618 Series Electric Actuators- 16ft Stock #: 588009A
    Usually Ships: Same Day
    Price: $50.40

    Buy 10 or more for $45.36 each

    Quantity :
    7-Conductor Cable for 5618 Series Electric Actuators- 32ft
    7-Conductor Cable for 5618 Series Electric Actuators- 32ft Stock #: 588010A
    Usually Ships: Same Day
    Price: $97.60

    Buy 10 or more for $87.84 each

    Quantity :

    We provide CAD models in virtually every format. Can't find exactly what you're looking for? Please email sales@valworx.com to request the specific files you need. Include the stock number and any accessories with your request.

    Note: Fusion360 users must have Fusion360 open in order to download.

    Note: if you are not seeing a list of CAD formats in the drop down menu, try clearing your browser's cache.

     

    Download CAD files
    CAD Format:

    Displaying the model may take a few seconds.
    powered by TraceParts