Valworx 566806 compact electric actuated 3-way full port stainless steel ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. These valves have a T-port diverter flow path. There is no flow shutoff position with this type valve. Actuator uses power-to-open (position 2) and power-to-close (position 1), stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via an all metal gear drive rotates the ball one quarter turn. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.
The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Two auxiliary limit switches are provided to confirm valve position.
Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI max. with kit.
Ball Valve Standard Features1000 PSI working pressure (see P/T chart) Direct mounting valve per ISO5211 Full port design 316 stainless steel body, ball and stem Four ball seat design allows for Full Pressure at any port PTFE ball seats for extended cycle life Triple PTFE/Viton stem seal design, live loaded and adjustable
Electric Actuator Standard FeaturesQuarter turn operation Rugged Type 4X weatherproof aluminum alloy housing Visual valve position indicator Manual override Heavy duty motor with overload protection Two auxiliary limit switches to confirm valve position All metal gear drive CSA Listed per UL429 and CSA C22.2, CE mark
Options (see Accessories tab)
The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Two auxiliary limit switches are provided to confirm valve position.
Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI max. with kit.
Ball Valve Standard Features
Electric Actuator Standard Features
Options (see Accessories tab)
Type
3-way T-Port Diverter
Voltage
110 VAC 50/60 Hz +/-10%
Current Rating
0.3A (full load amps)
Cycle Time
12 seconds per 90° rotation (no load)
Pipe Size
3/4" NPT female
Port Size
Full Port, Orifice 0.79 inches, Cv 10
Pressure (Max)
1000 PSI (see P/T chart), 25 PSI steam with kit, vacuum service to 29" Hg
Media Working Temperature
0-158 °F (-18 to 70 °C)
media 0-266 °F (-18 to 130 °C) with optional valve mounting kit
media 0-266 °F (-18 to 130 °C) with optional valve mounting kit
Actuator Temperature Rating
-22 to +140 °F (-30 to +60 °C)
Valve Temperature Rating
-4 to 325 °F (-30 to +163 °C)
Valve Body
316 stainless steel
Ball
316 stainless steel
Stem Seals
PTFE (Teflon)/FKM (Viton)
Ball Seats
PTFE (Teflon)
Duty Cycle
60%
Enclosure
Aluminum alloy, polyester painted, SS fasteners
Enclosure Rating
Type 4X and IP67 weatherproof
Electrical Connections
Prewired cable with flying leads 3 meter (9.8 feet)
Valve Position Confirmation
2 x SPST auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load
Manual Override
5mm hex drive with protective cover
Motor Protection
Thermal overload
-
High Temperature Mounting KitPrice: $64.00
Buy 6 or more for $57.60 each
Quantity

Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.
