Valworx 568559 compact electric actuated lead free brass ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. Ideal where lead free and NSF construction are required for potable drinking water as well as other industrial applications. The EPS- Electronic Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. Valve can be set to fail closed, in-place or open with loss of control signal. The valve will remain in the last known position with loss of electric power.
Valve position can be monitored with onboard analog output signal.
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package.
High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Ball Valve Standard FeaturesLead free brass body 600 PSI working pressure (see P/T chart) Direct mount ball valve per ISO5211 Full port design for unrestricted flow 316 Stainless steel ball and stem Blow out proof stem Energized PTFE ball seats for lower torque and extended cycle life Leak free triple PTFE/Viton stem seal packing Certified per NSF372 and NSF 61 for potable/drinking water
Electric Actuator Standard FeaturesEPS-Electronic Positioning System with 4-20mA input Quarter turn operation Rugged Type 4X weatherproof aluminum alloy housing Visual valve position indicator Manual override Heavy duty motor with overload protection Analog output signal to confirm valve position All metal gear drive CSA Listed per UL429 and CSA C22.2, CE mark
Options (see Accessories tab)
Valve position can be monitored with onboard analog output signal.
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package.
High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Ball Valve Standard Features
Electric Actuator Standard Features
Options (see Accessories tab)
| Type | Electric Actuated Brass Ball Valve- Positioner |
|---|---|
| Voltage | 110 VAC 50/60 Hz +/-10% |
| Current Rating | 0.3A (full load amps) |
| Input Control Signal | 4-20mA |
| Output Monitoring Signal | 4-20mA |
| Cycle Time | 12 seconds per 90° rotation (no load) |
| Pipe Size | 1" NPT female |
| Port Size | Full Port, orifice 1.0 inches, Cv 60 |
| Pressure (Max) | 600 PSI (see P/T chart), 25 PSI saturated steam with high temp kit, vacuum service to 29" Hg |
| Valve Temperature Range | -4 to 366 °F (-20 to 185 °C) |
| Actuator Temperature Range | -22 to +140 °F (-30 to +60 °C) |
| Valve Body | Lead Free Brass |
| Ball and Stem | 316 stainless steel |
| Ball Seats | PTFE (Teflon) energized with FKM (viton) |
| Stem Seals | PTFE (Teflon) with dual FKM (viton) seals |
| Duty Cycle | 60% |
| Enclosure | Aluminum alloy, polyester coating, SS fasteners |
| Enclosure Rating | Type 4X and IP67 weatherproof |
| Electrical Connections | Prewired cable with flying leads 3 meter (9.8 feet) |
| Valve Position Confirmation | 4-20mA output monitoring signal |
| Manual Override | 5mm hex drive with protective cover |
| Motor Protection | Thermal overload |
| Max Fluid Velocity | 10 feet per second |
-
High Temperature Mounting Kit
Price: $85.60
Buy 6 or more for $77.04 each
5685 Series Product Data Sheet 5617 Series EPS Positioner Electric Actuators - Installation Instructions IAPMO Certification to NSF/ANSI 61 Potable Drinking Water IAPMO Certification to NSF/ANSI 372 Lead Free
We provide CAD models in virtually every format. Can't find exactly what you're looking for? Please email sales@valworx.com to request the specific files you need. Include the stock number and any accessories with your request.
Note: Fusion360 users must have Fusion360 open in order to download.
Note: if you are not seeing a list of CAD formats in the drop down menu, try clearing your browser's cache.
Displaying the model may take a few seconds.
powered by TraceParts
-
Price: $69.66
Buy 3 or more for $62.70 each
-
Compact Electric Actuator 160 in.lbs (18Nm), 110 VAC, EPS Positioner Stock #: 561708Usually Ships: Same DayPrice: $622.40
Buy 3 or more for $560.16 each
