New! 7-conductor cable for 5618 series actuators

Electric 150# Flanged SS Ball Valve 1-1/2", 24 VDC, EPS Positioner

Electric 150# Flanged SS Ball Valve 1-1/2, 24 VDC, EPS Positioner
Stock #:
566074A
Brand:
Valworx
Series:
5660
Mfr Part #:
566074A
Availability: In Stock

List Price: $1502.00
Price: $1,201.60
Buy 3 for $1,081.44 each

Usually Ships: 5-7 Days
Free Shipping on orders over $99
Quantity
  • Description
  • Specifications
  • Accessories
  • Data Sheets
  • CAD
  • Video
  • Repair Parts
Valworx 566074A electric actuated 2-piece 150# flanged stainless steel ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. Full port 316 stainless steel investment cast valve mounts between standard ANSI 150 pound pipe flanges. The EPS- Electronic Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the control input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. The valve will remain in the last known position with loss of electric power.

The positioning module is self-calibrating and fully potted to help protect the electronics against vibration and moisture. Valve position can be monitored with onboard analog output signal.

The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.

Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI max. with kit.

Ball Valve Standard Features
  • 275 PSI working pressure (see P/T chart)
  • Direct mounting valve per ISO5211
  • Full port for unrestricted flow
  • 316 stainless steel body, ball and stem
  • Blow out proof stem
  • RTFE ball seats extend cycle life
  • Triple RTFE/Viton stem seal design, live loaded

  • Electric Actuator Standard Features
  • EPS-Electronic Positioning System with 4-20mA input
  • Quarter turn operation with mechanical limits
  • Rugged Type 4X weatherproof aluminum alloy housing
  • Visual valve position indicator
  • Manual override
  • Heavy duty motor with overload protection
  • Thermostatically controlled anti-condensation heater
  • Analog output signal to confirm valve position
  • Self-locking all metal gear drive, no additional brake required
  • CSA Listed per UL429 and CSA C22.2, CE marked

  • Options (see Accessories tab)
    Type2-way Flanged with EPS Positioner
    Voltage24VDC
    Current Rating1.0A @ 24VDC (full load amps)
    Input Control Signal4-20mA
    Cycle Time30 seconds per 90° rotation (no load)
    Pipe Size1-1/2" ANSI 150# flanged
    Port SizeFull Port, orifice 1.50 inches, Cv 125
    Pressure (Max)275 PSI (see P/T chart), 25 PSI steam with kit, vacuum service to 29" Hg
    Media Working Temperature0-158 °F (-18 to 70 °C)
    media 0-266 °F (-18 to 130 °C) with optional valve mounting kit
    Actuator Temperature Rating-22 to +140 °F (-30 to +60 °C)
    Valve Temperature Rating0 to 356 °F (-18 to +180 °C)
    Valve Body316 stainless steel
    Ball316 stainless steel
    Stem Seals RTFE (reinforced Teflon)/ FKM (Viton)
    Ball SeatsRTFE (reinforced Teflon)
    Duty Cycle70%
    EnclosureAluminum alloy, polyester painted, SS fasteners
    Enclosure RatingType 4X (IP67) weatherproof
    Electrical ConnectionsTerminal strip, 1/2" NPT conduit (optional) / cable connector (included)
    Valve Position Confirmation4-20mA output monitoring signal (same type as input signal)
    Manual Override5mm Hex Drive with protective cover
    Motor ProtectionCurrent sensor
    Anti-Condensation Heater4 watts thermostatically controlled
    Flange Face to FaceANSI B16.10 Class 150
    Flange DimensionsANSI B16.5 Class 150
    We provide 3D CAD models in Solidworks or STEP file formats for most of our Valworx products.

    Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.