2" Electric 3-way Brass L-Diverter Valve 24-240V

Stock #: 568216C
Brand: Valworx
Series: 5682
List Price: $1363.00
Price: $1,090.40
Buy 3 or more for $981.36 each
Usually Ships: Same Day
Free Shipping on orders over $99
Valworx 568216C electric actuated 3-way L-port lead free ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. Ideal where lead free and NSF approved construction are required for potable drinking water as well as other industrial applications. These FULL PORT valves can be used as either a diverter valve or selector valve. There is no flow shutoff position with this type valve. Actuator uses power-to-open (position 2) and power-to-close (position 1), stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a self-locking gear drive rotates the ball one quarter turn. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.

The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Anti-condensation heater will help protect actuator against damage caused by condensation. Two limit switches are provided to confirm valve position. Manual override can be used to operate valve during setup or with loss of electrical power.

High temperature valve mounting kit available for extended temperature range or wall mounting applications.

Advantages of electric actuated ball valves over other type valves may include: higher flow rates, higher pressures, higher temperatures, wider media compatibility, full port flow path, and reduced water hammer.

Ball Valve Standard Features
  • Direct mount lead free brass valve
  • Full Port for unrestricted flow
  • 316 stainless steel ball and stem
  • Four ball seat design allows for full pressure at any port
  • Energized PTFE ball seats for extended cycle life and reduced torque
  • Leak free triple PTFE/Viton stem seal design
  • Certified per NSF372 and NSF61 for use with potable/drinking water

  • Electric Actuator Standard Features
  • Multi-voltage capable with auto-voltage sensing
  • Electronic torque limiter
  • Anti-condensation heater
  • LED light gives continuous actuator status indication
  • Manual override with visual valve position indicator
  • Electrical connections via DIN plugs (included)
  • Two dry contact limit switches used to confirm valve position
  • IP65 weatherproof enclosure

  • Options (see Accessories tab)
    Type3-way L-Port Diverter or Selector
    Voltage24 to 240 Volts AC or DC (1ph, 50/60 Hz) auto voltage sensing
    Current Rating0.33A @ 110VAC, 0.18A @ 240VAC, 1.50A @ 24VAC
    1.22A @ 24VDC (full load amps)
    Cycle Time29 seconds per 90° rotation (no load)
    Pipe Size2" NPT female
    Port SizeFull Port, orifice 2.0 inches, Cv 82
    Pressure (Max)400 PSI CWP non-shock (see P/T chart),
    25 PSI steam with high temp. kit, vacuum service to 29" Hg
    Valve Temperature Range0 to 344 °F (-18 to 173 °C)
    Actuator Temperature Range-4 to +158 °F (-20 to +70 °C)
    Valve BodyLead Free Brass C69300
    Ball and Stem316 stainless steel
    Ball SeatsPTFE (Teflon) energized with FKM (viton)
    Stem Seals PTFE (Teflon) with dual FKM (Viton) seals
    Duty Cycle75%
    EnclosureAnti-corrosive polyamide, SS fasteners
    Enclosure RatingIP67 weatherproof, UV protection
    Electrical ConnectionsDIN plugs with cable entry (included), optional 1/2" conduit plugs
    Valve Position Confirmation2 x SPST auxiliary limit switches rated 3A@125/250VAC,
    30VDC resistive load
    Manual OverrideHand knob
    Motor ProtectionElectronic over-torque with LED status light
    Anti-Condensation Heater4 watts thermostatically controlled
    Max Fluid Velocity10 feet per second
    • Failsafe Battery Kit
      5610E BSR-NC Failsafe Battery Kit - Installed
      Price: $408.80
      Buy 3 or more for $367.92 each
      Quantity
    • 5610E BSR-NO Failsafe Battery Kit - Installed
      Price: $408.80
      Buy 3 or more for $367.92 each
      Quantity
    • Connectors & Cables
      ISO DIN Connector 1/2
      Price: $6.40
      Buy 10 or more for $5.76 each
      Quantity
    • Sub-Micro DIN Connector 1/2
      Price: $14.64
      Buy 10 or more for $13.18 each
      Quantity
    • ISO DIN Plug Connector with 16 ft Cable
      Price: $28.07
      Buy 10 or more for $25.26 each
      Quantity
    • Sub-Micro DIN Plug Connector with 16 foot Cable
      Price: $20.83
      Buy 10 or more for $18.75 each
      Quantity
    • High Temperature Mounting Kit
      High Temp/Wall Mounting Kit F05/07-14x14mm
      Price: $100.80
      Buy 6 or more for $90.72 each
      Quantity

    We provide CAD models in virtually every format. Can't find exactly what you're looking for? Please email sales@valworx.com to request the specific files you need. Include the stock number and any accessories with your request.

     

    Download CAD files
    CAD Format:

    Displaying the model may take a few seconds.
    powered by TraceParts