Electric 3-way Lead Free Brass L-Diverter Valve 3/8", 24-240V AC/DC
Stock #:
568203CBrand:
ValworxSeries:
5682Mfr Part #:
568203CAvailability: In Stock
List Price: $423.00
Price: $338.40
Buy 3 for $304.56 eachPrice: $338.40
Usually Ships: Same Day
Free Shipping on orders over $99
Free Shipping on orders over $99
- Description
- Specifications
- Accessories
- Data Sheets
- CAD
- Video
- Repair Parts
Valworx 568203C electric actuated 3-way L-port lead free ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. Ideal where lead free and NSF approved construction are required for potable drinking water as well as other industrial applications. These FULL PORT valves can be used as either a diverter valve or selector valve. There is no flow shutoff position with this type valve. Actuator uses power-to-open (position 2) and power to close (position 1), stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a self-locking gear drive rotates the ball one quarter turn. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.
The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Anti-condensation heater will help protect actuator against damage caused by condensation. Two limit switches are provided to confirm valve position. Manual override can be used to operate valve during setup or with loss of electrical power.
Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI with kit and vacuum service to 29 inch Hg.
Advantages of electric actuated ball valves over other type valves may include: higher flow rates, higher pressures, higher temperatures, wider media compatibility, full port flow path, and reduced water hammer.
Ball Valve Standard FeaturesDirect mount lead free brass valve Full Port for unrestricted flow 316 stainless steel ball and stem Four ball seat design allows for full pressure at any port Energized PTFE ball seats for extend cycle life Leak free triple PTFE/Viton stem seal design Certified per NSF372 and NSF61 for use with potable/drinking water
Electric Actuator Standard FeaturesMulti-voltage capable with auto-voltage sensing Electronic torque limiter Anti-condensation heater LED light gives continuous actuator status indication Manual override with visual valve position indicator Electrical connections via DIN plugs (included) Two dry contact limit switches used to confirm valve position IP67 weatherproof enclosure
Options (see Accessories tab)
The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Anti-condensation heater will help protect actuator against damage caused by condensation. Two limit switches are provided to confirm valve position. Manual override can be used to operate valve during setup or with loss of electrical power.
Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI with kit and vacuum service to 29 inch Hg.
Advantages of electric actuated ball valves over other type valves may include: higher flow rates, higher pressures, higher temperatures, wider media compatibility, full port flow path, and reduced water hammer.
Ball Valve Standard Features
Electric Actuator Standard Features
Options (see Accessories tab)
| Type | 3-way L-Port Diverter or Selector |
| Voltage | 24 to 240 Volts AC or DC (1ph, 50/60 Hz) auto voltage sensing |
| Current Rating | 0.3A @ 110VAC, 0.2A @ 240VAC, 1.2A @ 24VAC 0.8A @ 24VDC (full load amps) |
| Cycle Time | 10 seconds per 90° rotation (no load) |
| Pipe Size | 3/8" NPT female |
| Port Size | Full Port, orifice 0.39 inches, Cv 3.5 |
| Pressure (Max) | 400 PSI CWP non-shock (see P/T chart), 25 PSI steam with high temp. kit, vacuum service to 29" Hg |
| Media Working Temperature | 0-158 °F (-18 to 70 °C) media 0-266 °F (-18 to 130 °C) with optional high temp. kit |
| Actuator Temperature Rating | -4 to +158 °F (-20 to +70 °C) |
| Valve Temperature Rating | 0 to 344 °F (-18 to 173 °C) |
| Valve Body | Lead Free Brass C69300 |
| Ball and Stem | 316 stainless steel |
| Ball Seats | PTFE (Teflon) energized with FKM (viton) |
| Stem Seals | PTFE (Teflon) with dual FKM (Viton) seals |
| Duty Cycle | 75% |
| Enclosure | Anti-corrosive polyamide, SS fasteners |
| Enclosure Rating | IP67 weatherproof, UV protection |
| Electrical Connections | DIN plugs with cable entry (included), optional 1/2" conduit plugs |
| Valve Position Confirmation | 2 x SPST auxiliary limit switches rated 3A@125/250VAC, 30VDC resistive load |
| Manual Override | Hand knob |
| Motor Protection | Electronic over-torque with LED status light |
| Anti-Condensation Heater | 4 watts thermostatically controlled |
| Approvals - Actuator | CE mark, ISO5211 valve mount |
| Approvals - Valve | IAPMO certified to NSF/ANSI 372, NSF/ANSI 61 drinking water, MSS-SP-110 |
| Weight | 4.7 lbs (2.13 kg) |
-
Failsafe Battery Kit -
Connectors & Cables -
Sub-Micro DIN Connector 1/2" Conduit Connection
Stock #: 588003Price: $13.84
Buy 10 for $12.46 each
-
Sub-Micro DIN Plug Connector with 16 foot Cable
Stock #: 588007APrice: $18.03
Buy 10 for $16.23 each
-
High Temperature Mounting Kit
We provide 3D CAD models in Solidworks or STEP file formats for most of our Valworx products.Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.
