Electric 3-way Lead Free Brass T-Diverter Valve 1/2", 24 VDC

Electric 3-way Lead Free Brass T-Diverter Valve 1/2, 24 VDC
Stock #:
567946A
Brand:
Valworx
Series:
5679
Mfr Part #:
567946A
Availability: In Stock

List Price: $537.00
Price: $429.60
Buy 3 for $386.64 each

Usually Ships: Same Day
Free Shipping on orders over $99
Quantity
  • Description
  • Specifications
  • Accessories
  • Data Sheets
  • CAD
  • Video
  • Repair Parts
Valworx 567946A electric actuated 3-way FULL PORT lead free ball valves are used to control the flow of water, air, oil, and other media compatible with the materials of construction. These 3-way T-Port valves are typically used as a flow diverter valve. Four ball seat design allows for full pressure at any port. Ideal where lead free and NSF approved construction are required for potable drinking water or other general industrial applications. Actuator uses power-to-open (position 2) and power-to-close (position 1), stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via an all metal self-locking gear drive rotates the ball one quarter turn. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position. There is no flow shutoff position with this type valve.

The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation. Two auxiliary limit switches are provided to confirm valve position.

High performance ball and stem are made of 316 stainless steel rather than the typical plated brass. Energized PTFE ball seats are designed for low torque and extended cycle life. These ball valves offer a unique triple PTFE/Viton leak free stem seal design.

Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI max. with kit and vacuum to 29 inch Hg.

Ball Valve Standard Features
  • Full Port design
  • Lead free brass body
  • 400 PSI working pressure (see P/T chart)
  • Direct mounting valve per ISO5211
  • Stainless steel ball and stem
  • Four ball seat design allows for full pressure at any port
  • Energized PTFE ball seats for extend cycle life and reduce torque
  • Leak free triple PTFE/Viton stem seal design
  • Certified per NSF372 and NSF61 for use with potable/drinking water

    Electric Actuator Standard Features
  • Quarter turn operation with mechanical limits
  • Rugged Type 4X weatherproof aluminum alloy housing
  • Visual valve position indicator
  • Manual override
  • Heavy duty motor with overload protection
  • Thermostatically controlled anti-condensation heater
  • Two auxiliary limit switches to confirm valve position
  • Self-locking all metal gear drive, no additional brake required
  • CSA Listed per UL429 and CSA C22.2, CE mark
  • Type3-way T-Port Diverter
    Voltage24 VDC
    Current Rating1.28A @ 24VDC (full load amps)
    Cycle Time20 seconds per 90° rotation (no load)
    Pipe Size1/2" NPT female
    Port SizeFull Port, orifice 0.59 inches, Cv 4.5
    Pressure (Max)400 PSI CWP non-shock (see P/T chart),
    Vacuum service to 29" Hg, 25 PSI Steam with high temp. kit,
    Media Working Temperature0-158 °F (-18 to 70 °C)
    media 0-266 °F (-18 to 130 °C) with optional valve mounting kit
    Actuator Temperature Rating-22 to +140 °F (-30 to +60 °C)
    Valve Temperature Rating0 to 344 °F (-18 to +173 °C)
    Valve BodyLead Free Brass C69300
    Ball and Stem316 stainless steel
    Stem Seals PTFE (Teflon) with dual FKM (Viton) seals
    Ball Seats(4) PTFE (Teflon) energized with FKM (Viton)
    Duty Cycle70%
    EnclosureAluminum alloy, polyester painted, SS fasteners
    Enclosure RatingType 4X (IP67) weatherproof
    Electrical ConnectionsTerminal strip, 1/2" NPT conduit (optional) / cable connector (included)
    Valve Position Confirmation2 x SPST auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load
    Manual Override5mm hex drive with protective cover
    Motor ProtectionCurrent sensor
    Anti-Condensation Heater4 watts thermostatically controlled
    We provide 3D CAD models in Solidworks or STEP file formats for most of our Valworx products.

    Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.