New! 7-conductor cable for 5618 series actuators

Electric 3-way Lead Free Brass T-Diverter Valve 3/8",24-240V AC/DC

Electric 3-way Lead Free Brass T-Diverter Valve 3/8,24-240V AC/DC
Stock #:
568303C
Brand:
Valworx
Series:
5683
Mfr Part #:
568303C
Availability: In Stock

List Price: $423.00
Price: $338.40
Buy 3 for $304.56 each

Usually Ships: Same Day
Free Shipping on orders over $99
Quantity
  • Description
  • Specifications
  • Accessories
  • Data Sheets
  • CAD
  • Video
  • Repair Parts
Valworx 568303C electric actuated 3-way T-port lead free ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. Ideal where lead free and NSF approved construction are required for potable drinking water as well as other industrial applications. These FULL PORT valves are typically used as a flow diverter valve. There is no flow shutoff position with this type valve. Actuator uses power-to-open (position 2) and power to close (position 1), stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a self-locking gear drive rotates the ball one quarter turn. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.

The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Anti-condensation heater will help protect actuator against damage caused by condensation. Two limit switches are provided to confirm valve position. Manual override can be used to operate valve during setup or with loss of electrical power.

Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI with kit and vacuum service to 29 inch Hg.

Advantages of electric actuated ball valves over other type valves may include: higher flow rates, higher pressures, higher temperatures, wider media compatibility, full port flow path, and reduced water hammer.

Ball Valve Standard Features
  • Direct mount lead free brass valve
  • Full Port for unrestricted flow
  • 316 stainless steel ball and stem
  • Four ball seat design allows for full pressure at any port
  • Energized PTFE ball seats for extend cycle life
  • Leak free triple PTFE/Viton stem seal design
  • Certified per NSF372 and NSF61 for use with potable/drinking water

  • Electric Actuator Standard Features
  • Multi-voltage capable with auto-voltage sensing
  • Electronic torque limiter
  • Anti-condensation heater
  • LED light gives continuous actuator status indication
  • Manual override with visual valve position indicator
  • Electrical connections via DIN plugs (included)
  • Two dry contact limit switches used to confirm valve position
  • IP67 weatherproof enclosure

  • Options (see Accessories tab)
    Type3-way T-Port Diverter
    Voltage24 to 240 Volts AC or DC (1ph, 50/60 Hz) auto voltage sensing
    Current Rating0.3A @ 110VAC, 0.2A @ 240VAC, 1.2A @ 24VAC
    0.8A @ 24VDC (full load amps)
    Cycle Time10 seconds per 90° rotation (no load)
    Pipe Size3/8" NPT female
    Port SizeFull Port, orifice 0.39 inches, Cv 3.5
    Pressure (Max)400 PSI CWP non-shock (see P/T chart),
    25 PSI steam with high temp. kit, vacuum service to 29" Hg
    Media Working Temperature0-158 °F (-18 to 70 °C)
    media 0-266 °F (-18 to 130 °C) with optional high temp. kit
    Actuator Temperature Rating-4 to +158 °F (-20 to +70 °C)
    Valve Temperature Rating0 to 344 °F (-18 to 173 °C)
    Valve BodyLead Free Brass C69300
    Ball and Stem316 stainless steel
    Ball SeatsPTFE (Teflon) energized with FKM (viton)
    Stem Seals PTFE (Teflon) with dual FKM (Viton) seals
    Duty Cycle75%
    EnclosureAnti-corrosive polyamide, SS fasteners
    Enclosure RatingIP67 weatherproof, UV protection
    Electrical ConnectionsDIN plugs with cable entry (included), optional 1/2" conduit plugs
    Valve Position Confirmation2 x SPST auxiliary limit switches rated 3A@125/250VAC,
    30VDC resistive load
    Manual OverrideHand knob
    Motor ProtectionElectronic over-torque with LED status light
    Anti-Condensation Heater4 watts thermostatically controlled
    We provide 3D CAD models in Solidworks or STEP file formats for most of our Valworx products.

    Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.