Electric 3-Way Stainless L-Diverter Valve 3/8", 24-240V AC/DC

Electric 3-Way Stainless L-Diverter Valve 3/8, 24-240V AC/DC
Stock #:
Mfr Part #:
Availability: In Stock

List Price: $532.00
Price: $425.60
Buy 3 for $383.04 each

Usually Ships: Same Day
Free Shipping on orders over $99
  • Description
  • Specifications
  • Accessories
  • Data Sheets
  • CAD
  • Video
  • Repair Parts
Valworx 560803E electric actuated 3-way L-port stainless steel ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. These FULL PORT valves can be used as either a diverter valve or selector valve. There is no flow shutoff position with this type valve. Actuator uses power-to-open (position 2) and power-to-close (position 1), stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a self-locking gear drive rotates the ball one quarter turn. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.

The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Anti-condensation heater will help protect actuator against damage caused by condensation. Two limit switches are provided to confirm valve position. Manual override can be used to operate valve during setup or with loss of electrical power.

Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI with kit and vacuum service to 29 inch Hg.

Advantages of electric actuated ball valves over other type valves may include: higher flow rates, higher pressures, higher temperatures, wider media compatibility, full port flow path, and reduced water hammer.

Ball Valve Standard Features
  • 1000 PSI working pressure (see P/T chart)
  • Full port design
  • 316 stainless steel body, ball and stem
  • Four ball seat design allows for full pressure at any port
  • PTFE ball seats for extend cycle life
  • Triple PTFE/Viton stem seal design, live loaded and adjustable
  • Valve direct mounts to actuator per ISO5211

  • Electric Actuator Standard Features
  • Multi-voltage with auto-voltage sensing
  • Electronic over torque protection
  • Anti-condensation heater
  • External LED diagnostic light
  • Manual override
  • Highly visual valve position indicator
  • Electrical connections via DIN plug connectors (included)
  • Auxiliary limit switches used to confirm valve positions
  • Corrosion resistant polyamide IP67 weatherproof enclosure

  • Options (see Accessories tab)
    Type3-way L-Port Diverter or Selector Valve
    Voltage24 to 240 Volts AC or DC (1 ph, 50/60 Hz) auto voltage sensing
    Current Rating0.3A @ 110VAC, 0.2A @ 240VAC, 1.2A @ 24VAC
    0.8A @ 24VDC (full load amps)
    Cycle Time10 seconds per 90° rotation (+/-10% no load)
    Pipe Size3/8" NPT female
    Port SizeFull Port, orifice 0.43 inches, Cv 3.5
    Pressure (Max)1000 PSI CWP non-shock (see P/T chart),
    25 PSI steam with high temp. kit, vacuum service to 29" Hg
    Media Working Temperature0-158 °F (-18 to 70 °C)
    media 0-266 °F (-18 to 130 °C) with optional high temp. kit
    Actuator Temperature Rating-4 to +158 °F (-20 to +70 °C)
    Valve Temperature Rating-4 to 325 °F (-20 to 163 °C)
    Valve Body316 stainless steel
    Ball and Stem316 stainless steel
    Ball SeatsPTFE (Teflon)
    Stem Seals PTFE (Teflon)/ Viton
    Duty Cycle75%
    EnclosureAnti-corrosive polyamide, SS fasteners
    Enclosure RatingIP67 weatherproof, UV protection
    Electrical ConnectionsDIN plugs with cable entry (included), optional 1/2" conduit plugs
    Valve Position Confirmation2 x SPST auxiliary limit switches rated 3A@125/250VAC,
    30VDC resistive load
    Manual OverrideHand knob
    Motor ProtectionElectronic over-torque with LED status light
    Anti-Condensation Heater4 watts thermostatically controlled
    We provide 3D CAD models in Solidworks or STEP file formats for most of our Valworx products.

    Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.