New! 1/2" and 3/4" Flanged Ball Valves

Electric 3-Way Stainless T-Diverter Valve 1-1/2", 12 or 24 VDC

Electric 3-Way Stainless T-Diverter Valve 1-1/2, 12 or 24 VDC
Stock #:
565851
Brand:
Valworx
Series:
5658
Mfr Part #:
565851
Availability: In Stock

List Price: $1013.00
Price: $810.40
Buy 3 for $729.36 each

Usually Ships: 5-7 Days
Free Shipping on orders over $99
Quantity
  • Description
  • Specifications
  • Accessories
  • Data Sheets
  • CAD
  • Video
  • Repair Parts
Valworx 565851 electric actuated 3-way Full Port stainless steel ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. These valves have a T-port diverter type flow path. There is no flow shutoff position with this type valve. Actuator uses power-to-open (position 2) and power to close (position 1), stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via an all metal self-locking gear drive rotates the ball one quarter turn. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.

The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by Intertek ETL. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation. Two auxiliary limit switches are provided to confirm valve position.

Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI max. with kit.

Ball Valve Standard Features
  • 1000 PSI working pressure (see P/T chart)
  • Direct mounting valve per ISO5211
  • Full port design
  • 316 stainless steel body, ball and stem
  • Four ball seat design allows for Full Pressure at any port
  • PTFE ball seats for extended cycle life
  • Triple PTFE/Viton stem seal design, live loaded and adjustable

  • Electric Actuator Standard Features
  • Quarter turn operation with mechanical limits
  • Rugged Type 4X weatherproof aluminum alloy housing
  • Visual valve position indicator
  • Manual override
  • Heavy duty motor with overload protection
  • Thermostatically controlled anti-condensation heater
  • Two auxiliary limit switches to confirm valve position
  • Self-locking all metal gear drive, no additional brake required
  • ETL Listed per UL429 and CSA C22.2, CE mark

  • Options (see Accessories)
  • High temp. valve mounting kit - extend media working temperature up to 266 °F (130 °C)
  • Type3-way T-Port Diverter
    Voltage12 or 24VDC
    Current Rating2.7A @ 12VDC, 1.5A @ 24VDC (full load amps)
    Cycle Time10 seconds per 90° rotation (no load)
    Pipe Size1-1/2" NPT female
    Port SizeFull Port, orifice 1.50 inches, Cv 49
    Pressure (Max)1000 PSI (see P/T chart), 25 PSI steam with kit, vacuum service to 29" Hg
    Media Working Temperature0-158 °F (-18 to 70 °C)
    media 0-266 °F (-18 to 130 °C) with optional valve mounting kit
    Actuator Temperature Rating-4 to +140 °F (-20 to +60 °C)
    Valve Temperature Rating-4 to 325 °F (-20 to +163 °C)
    Valve Body316 stainless steel
    Ball316 stainless steel
    Stem Seals PTFE (Teflon)/FKM (Viton)
    Ball SeatsPTFE (Teflon)
    Duty Cycle60%
    EnclosureAluminum alloy, polyester painted, SS fasteners
    Enclosure RatingType 4X (IP65) weatherproof
    Electrical ConnectionsTerminal strip, 1/2" NPT conduit/ cable connector (included)
    Valve Position Confirmation2 x SPST auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load
    Manual Override5mm hex drive with protective cover
    Motor ProtectionCurrent sensor
    Anti-Condensation Heater4 watts thermostatically controlled
    Approvals - ActuatorETL Listed. Conforms to UL Std 429, Certified to CSA Std C22.2 No. 139, CE mark
    Approvals - ValvePressure tested to API-598, CE per PED 97/23/EC
    Weight18.7 lbs (8.5 kg)
    We provide 3D CAD models in Solidworks or STEP file formats for most of our Valworx products.

    Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.