Valworx 565359C electric actuated 3-piece stainless steel ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. The valve has a unique three piece investment cast bolted body design with the advantage of a swing out body for easy inline maintenance. The EPS- Electronic Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the control input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. The valve will remain in the last known position with loss of electric power.
The positioning module is self-calibrating and fully potted to help protect the electronics against vibration and moisture. Valve position can be monitored with onboard analog output signal.
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.
High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Ball Valve Standard Features1000 PSI working pressure (see P/T chart) Direct mounting valve per ISO5211 Full port for unrestricted flow 316 stainless steel body, ball and stem Blow out proof stem RTFE ball seats extend cycle life Triple RTFE/Viton stem seal design, live loaded
Electric Actuator Standard FeaturesEPS-Electronic Positioning System with 4-20mA input Quarter turn operation with mechanical limits Rugged Type 4X weatherproof aluminum alloy housing Visual valve position indicator Manual override Heavy duty motor with overload protection Thermostatically controlled anti-condensation heater Analog output signal to confirm valve position Self-locking all metal gear drive, no additional brake required CSA Listed per UL429 and CSA C22.2, CE marked
Options (see Accessories tab)
The positioning module is self-calibrating and fully potted to help protect the electronics against vibration and moisture. Valve position can be monitored with onboard analog output signal.
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.
High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Ball Valve Standard Features
Electric Actuator Standard Features
Options (see Accessories tab)
Type
2-way with EPS Positioner
Voltage
110 VAC 50/60 Hz
Current Rating
0.27 A (full load amps)
Input Control Signal
4-20mA
Cycle Time
20 seconds per 90° rotation (no load)
Pipe Size
1" NPT female
Port Size
Full Port, orifice 1.00 inches, Cv 60
Pressure (Max)
1000 PSI (see P/T chart), 25 PSI steam with kit, vacuum service to 29" Hg
Valve Temperature Range
-4 to +356 °F (-20 to +180 °C)
Actuator Temperature Range
-13 to 131 °F (-25 to +55 °C)
Valve Body
316 stainless steel
Ball
316 stainless steel
Stem Seals
RTFE (reinforced Teflon)/ FKM (Viton)
Ball Seats
RTFE (reinforced Teflon)
Duty Cycle
70%
Enclosure
Aluminum alloy, polyester painted, SS fasteners
Enclosure Rating
Type 4X (IP67) weatherproof
Electrical Connections
Terminal strip, 1/2" NPT conduit / cable connector (included)
Valve Position Confirmation
4-20mA output monitoring signal (same type as input signal)
Manual Override
5mm hex drive with protective cover
Motor Protection
Thermal overload
Anti-Condensation Heater
4 watts thermostatically controlled
-
High Temperature Mounting Kit
Price: $81.60
Buy 6 or more for $73.44 each
-
Connectors and Cables
Price: $9.60
Buy 3 or more for $8.64 each
-
Price: $31.20
Buy 10 or more for $28.08 each
We provide CAD models in virtually every format. Can't find exactly what you're looking for? Please email sales@valworx.com to request the specific files you need. Include the stock number and any accessories with your request.
Displaying the model may take a few seconds.
powered by TraceParts
Related Additional Products
-
Price: $120.00
Buy 3 or more for $108.00 each
-
Price: $903.20
Buy 3 or more for $812.88 each
Customer
Technical