New! 7-conductor cable for 5618 series actuators

Electric Actuated 3 pc SS Ball Valve 1-1/4", 24 VDC

Electric Actuated 3 pc SS Ball Valve 1-1/4, 24 VDC
Stock #:
565350A
Brand:
Valworx
Series:
5653
Mfr Part #:
565350A
Availability: In Stock

List Price: $612.00
Price: $489.60
Buy 3 for $440.64 each

Usually Ships: Same Day
Free Shipping on orders over $99
Quantity
  • Description
  • Specifications
  • Accessories
  • Data Sheets
  • CAD
  • Video
  • Repair Parts
Valworx 565350A electric actuated 3-piece stainless steel ball valve is used for on-off control of water, air, oil, and other media compatible with the materials of construction. The valve has a unique three piece investment cast bolted body design with the advantage of a swing out body for easy inline maintenance. Standard unit is power-to-open and power to close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a self-locking all metal gear drive rotates the ball. The motor is stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.

The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.

Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI max. with kit.

Ball Valve Standard Features
  • 1000 PSI working pressure (see P/T chart)
  • 3-piece swing out design for easy maintenance
  • Direct mounting valve per ISO5211
  • Full port for unrestricted flow
  • 316 stainless steel body, ball and stem
  • Blow out proof stem
  • RTFE ball seats extend cycle life
  • Triple RTFE/Viton stem seal design, live loaded

  • Electric Actuator Standard Features
  • Quarter turn operation with mechanical limits
  • Rugged Type 4X weatherproof aluminum alloy housing
  • Visual valve position indicator
  • Manual override
  • Heavy duty motor with overload protection
  • Thermostatically controlled anti-condensation heater
  • Two auxiliary limit switches to confirm valve position
  • Self-locking all metal gear drive, no additional brake required
  • CSA Listed per UL429 and CSA C22.2, CE mark

  • Options (see Accessories tab)
    Type2-way On-Off
    Voltage24 VDC
    Current Rating1.28A @ 24VDC (full load amps)
    Cycle Time20 seconds per 90° rotation (no load)
    Pipe Size1-1/4" NPT female
    Port SizeFull Port, orifice 1.25 inches, Cv 90
    Pressure (Max)1000 PSI (see P/T chart), 25 PSI steam with kit, vacuum service to 29" Hg
    Media Working Temperature0-158 °F (-18 to 70 °C)
    media 0-266 °F (-18 to 130 °C) with optional valve mounting kit
    Actuator Temperature Rating-22 to +140 °F (-30 to +60 °C)
    Valve Temperature Rating0 to 366 °F (-18 to +185 °C)
    Valve Body316 stainless steel
    Ball316 stainless steel
    Stem Seals RTFE (reinforced Teflon)/ FKM (Viton)
    Ball SeatsRTFE (reinforced Teflon)
    Duty Cycle70%
    EnclosureAluminum alloy, polyester painted, SS fasteners
    Enclosure RatingType 4X (IP67) weatherproof
    Electrical ConnectionsTerminal strip, 1/2" NPT conduit (optional) / cable connector (included)
    Valve Position Confirmation2 x SPST auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load
    Manual Override5mm hex drive with protective cover
    Motor ProtectionCurrent sensor
    Anti-Condensation Heater4 watts thermostatically controlled
    Approvals - ActuatorCSA Listed. Conforms to UL Std 429, Certified to CSA Std C22.2 No. 139, CE mark
    Approvals - ValvePressure tested to API-598, CE per PED 97/23/EC
    Weight11.6 lbs (5.3 kg)
    We provide 3D CAD models in Solidworks or STEP file formats for most of our Valworx products.

    Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.