Valworx 565316A electric actuated 3-piece stainless steel ball valve is used for on-off control of water, air, oil, and other media compatible with the materials of construction. Unique three piece investment cast bolted body design offers the advantage of a swing out body for easy inline maintenance. Standard unit is power-to-open and power to close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a self-locking all metal gear drive rotates the ball. The motor is stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.
Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI max. with kit.
Ball Valve Standard Features1000 PSI working pressure (see P/T chart) 3-piece swing out design for easy maintenance Direct mounting valve per ISO5211 Full port for unrestricted flow 316 stainless steel body, ball and stem Blow out proof stem RTFE ball seats extend cycle life Triple RTFE/Viton stem seal design, live loaded
Electric Actuator Standard FeaturesQuarter turn operation with mechanical limits Rugged Type 4X weatherproof aluminum alloy housing Visual valve position indicator Manual override Heavy duty motor with overload protection Thermostatically controlled anti-condensation heater Two auxiliary limit switches to confirm valve position Self-locking all metal gear drive, no additional brake required CSA Listed per UL429 and CSA C22.2, CE mark
Options (see Accessories tab)
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.
Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI max. with kit.
Ball Valve Standard Features
Electric Actuator Standard Features
Options (see Accessories tab)
Type
2-way On-Off
Voltage
110 VAC 50/60 Hz
Current RAting
0.27A (full load amps)
Cycle Time
20 seconds per 90° rotation (no load)
Pipe Size
2" NPT female
Port Size
Full Port, orifice 2.00 inches, Cv 240
Pressure (Max)
1000 PSI see P/T chart, 25 PSI steam with kit, vacuum service to 29" Hg
Media Working Temperature
0-158 °F (-18 to 70 °C)
media 0-266 °F (-18 to 130 °C) with optional valve mounting kit
media 0-266 °F (-18 to 130 °C) with optional valve mounting kit
Actuator Temperature Rating
-22 to +140 °F (-30 to +60 °C)
Valve Temperature Rating
0 to 366 °F (-18 to +185 °C)
Valve Body
316 stainless steel
Ball
316 stainless steel
Stem Seals
RTFE (reinforced Teflon)/ FKM (Viton)
Ball Seats
RTFE (reinforced Teflon)
Duty Cycle
70%
Enclosure
Aluminum alloy, polyester painted, SS fasteners
Enclosure Rating
Type 4X (IP67) weatherproof
Electrical Connections
Terminal strip, 1/2" NPT conduit (optional) / cable connector (included)
Valve Position Confirmation
2 x SPST auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load
Manual Override
5mm hex drive with protective cover
Motor Protection
Thermal overload
Anti-Condensation Heater
4 watts thermostatically controlled
-
High Temperature Mounting Kit
Price: $74.40
Buy 6 or more for $66.96 each
-
Connectors and Cables
Price: $7.20
Buy 3 or more for $6.48 each
-
Price: $23.20
Buy 10 or more for $20.88 each
We provide 3D CAD models in Solidworks or STEP file formats for most of our Valworx products.Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.
Related Products
Customer
Technical