New! 7-conductor cable for 5618 series actuators

Electric Actuated Lead Free Brass Ball Valve 1/4", 110 VAC

Electric Actuated Lead Free Brass Ball Valve 1/4, 110 VAC
Stock #:
567602A
Brand:
Valworx
Series:
5676
Mfr Part #:
567602A
Availability: In Stock

List Price: $482.00
Price: $385.60
Buy 3 for $347.04 each

Usually Ships: Same Day
Free Shipping on orders over $99
Quantity
  • Description
  • Specifications
  • Accessories
  • Data Sheets
  • CAD
  • Video
  • Repair Parts
Valworx 567602A electric actuated lead free brass ball valve is used for on-off control of water, air, oil, and other media compatible with the materials of construction. Ideal where lead free and NSF construction are required for potable drinking water as well as other industrial applications. These actuated valves use power-to-open and power to close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a self-locking all metal gear drive rotates the ball. The motor is stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.

The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.

Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI max. with kit.

Ball Valve Standard Features
  • Lead free brass body
  • 600 PSI working pressure (see P/T chart)
  • Direct mount ball valve per ISO5211
  • Full port design for unrestricted flow
  • 316 Stainless steel ball and stem
  • Blow out proof stem
  • Energized PTFE ball seats for lower torque and extended cycle life
  • Leak free triple PTFE/Viton stem seal packing
  • Certified per NSF372 and NSF 61 for potable/drinking water

  • Electric Actuator Standard Features
  • Quarter turn operation with mechanical stops
  • Rugged Type 4X weatherproof aluminum alloy enclosure
  • Visual valve position indicator
  • Manual override
  • Heavy duty motor with overload protection
  • Thermostatically controlled anti-condensation heater
  • Two auxiliary limit switches to confirm valve positions
  • Self-locking all metal gear drive, no additional brake required
  • CSA Listed per UL429 and CSA C22.2, CE mark

  • Options (see Accessories tab)
    Type2-way On-Off
    Voltage110 VAC 50/60Hz
    Current Rating0.27A (full load amps)
    Cycle Time10 seconds per 90° rotation (no load)
    Pipe Size1/4" NPT female
    Port SizeFull Port, orifice 0.39 inches, Cv 8
    Pressure Rating600 PSI CWP non-shock (see P/T chart),
    Vacuum service to 29"Hg, 25 PSI steam with kit
    Media Working Temperature0-158 °F (-18 to 70 °C)
    media 0-266 °F (-18 to 130 °C) with optional valve mounting kit
    Actuator Temperature Rating-22 to +140 °F (-30 to +60 °C)
    Valve Temperature Rating0 to 366 °F (-18 to +185 °C)
    Valve BodyLead Free Brass C69300
    Ball and Stem316 stainless steel
    Ball SeatsPTFE (Teflon) energized with FKM (viton)
    Stem Seals PTFE (Teflon) with dual FKM (Viton) seals
    Duty Cycle70%
    EnclosureAluminum alloy, polyester coating, SS fasteners
    Enclosure RatingType 4X (IP67) weatherproof
    Electrical ConnectionsTerminal strip, 1/2" NPT conduit (optional) / cable connector (included)
    Valve Position Confirmation2 x SPST auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load
    Manual Override5mm hex drive with protective cover
    Motor ProtectionThermal overload
    Anti-Condensation Heater4 watts thermostatically controlled
    Approvals - ActuatorCSA Listed. Conforms to UL Std 429, Certified to CSA Std C22.2 No. 139,
    CE mark
    Approvals - ValveIAPMO certified to NSF/ANSI 372, NSF/ANSI 61 drinking water,
    MSS-SP-110
    Weight6.5 lbs (2.9 kg)
    We provide 3D CAD models in Solidworks or STEP file formats for most of our Valworx products.

    Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.