Valworx 567603A electric actuated lead free brass ball valve is used for on-off control of water, air, oil, and other media compatible with the materials of construction. Ideal where lead free and NSF construction are required for potable drinking water as well as other industrial applications. These actuated valves use power-to-open and power to close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a self-locking all metal gear drive rotates the ball. The motor is stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.
Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI max. with kit.
Ball Valve Standard FeaturesLead free brass body 600 PSI working pressure (see P/T chart) Direct mount ball valve per ISO5211 Full port design for unrestricted flow 316 Stainless steel ball and stem Blow out proof stem Energized PTFE ball seats for lower torque and extended cycle life Leak free triple PTFE/Viton stem seal packing Certified per NSF372 and NSF 61 for potable/drinking water
Electric Actuator Standard FeaturesQuarter turn operation with mechanical stops Rugged Type 4X weatherproof aluminum alloy enclosure Visual valve position indicator Manual override Heavy duty motor with overload protection Thermostatically controlled anti-condensation heater Two auxiliary limit switches to confirm valve positions Self-locking all metal gear drive, no additional brake required CSA Listed per UL429 and CSA C22.2, CE mark
Options (see Accessories tab)
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.
Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI max. with kit.
Ball Valve Standard Features
Electric Actuator Standard Features
Options (see Accessories tab)
Type
2-way On-Off
Voltage
110 VAC 50/60Hz
Current Rating
0.27A (full load amps)
Cycle Time
10 seconds per 90° rotation (no load)
Pipe Size
3/8" NPT female
Port Size
Full Port, orifice 0.50 inches, Cv 10
Pressure Rating
600 PSI CWP non-shock (see P/T chart),
Vacuum service to 29"Hg, 25 PSI steam with kit
Vacuum service to 29"Hg, 25 PSI steam with kit
Media Working Temperature
0-158 °F (-18 to 70 °C)
media 0-266 °F (-18 to 130 °C) with optional valve mounting kit
media 0-266 °F (-18 to 130 °C) with optional valve mounting kit
Actuator Temperature Rating
-22 to +140 °F (-30 to +60 °C)
Valve Temperature Rating
0 to 366 °F (-18 to +185 °C)
Valve Body
Lead Free Brass C69300
Ball and Stem
316 stainless steel
Ball Seats
PTFE (Teflon) energized with FKM (viton)
Stem Seals
PTFE (Teflon) with dual FKM (Viton) seals
Duty Cycle
70%
Enclosure
Aluminum alloy, polyester coating, SS fasteners
Enclosure Rating
Type 4X (IP67) weatherproof
Electrical Connections
Terminal strip, 1/2" NPT conduit (optional) / cable connector (included)
Valve Position Confirmation
2 x SPST auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load
Manual Override
5mm hex drive with protective cover
Motor Protection
Thermal overload
Anti-Condensation Heater
4 watts thermostatically controlled
-
High Temperature Mounting Kit
Price: $67.20
Buy 6 or more for $60.48 each
-
Connectors and Cables
Price: $7.20
Buy 3 or more for $6.48 each
-
Price: $23.20
Buy 10 or more for $20.88 each
We provide 3D CAD models in Solidworks or STEP file formats for most of our Valworx products.Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.
Related Products
Customer
Technical