Valworx 568003C electric actuated lead free brass ball valve is used for on-off control of water, air, oil, and other media compatible with the materials of construction. Ideal where lead free and NSF construction are required for potable drinking water as well as other industrial applications. Standard unit is power-to-open and power to close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a self locking flat gear drive, rotates the ball. The motor is stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.
The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation. Two limit switches are provided to confirm valve position. Manual override can be used to operate valve during setup or with loss of electrical power.
Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI with kit and vacuum service to 29 inch Hg.
Ball Valve Standard FeaturesDirect mount lead free brass valve Full Port for unrestricted flow 316 stainless steel ball and stem Energized PTFE ball seats for extend cycle life and reduce torque Leak free triple PTFE/Viton stem seal design Certified per NSF372 and NSF61 for use with potable/drinking water
Electric Actuator Standard FeaturesLED light gives continuous actuator status indication Multi-voltage capable with auto-voltage sensing Electronic torque limiter - protects against valve jams Anti-condensation heater Manual override with visual valve position indicator Electrical connections via external DIN plugs (included) Two dry contact limit switches used to confirm open/closed valve position IP67 weatherproof enclosure, CE marked
Options (see Accessories tab)
The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation. Two limit switches are provided to confirm valve position. Manual override can be used to operate valve during setup or with loss of electrical power.
Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI with kit and vacuum service to 29 inch Hg.
Ball Valve Standard Features
Electric Actuator Standard Features
Options (see Accessories tab)
Type
2-way On-Off
Voltage
24 to 240 Volts AC or DC (1ph, 50/60Hz) auto voltage sensing
Current Rating
0.3A @ 110VAC, 0.2A @ 240VAC, 1.2A @ 24VAC
0.8A @ 24VDC (full load amps)
0.8A @ 24VDC (full load amps)
Cycle Time
10 seconds per 90° rotation (no load)
Pipe Size
3/8" NPT female
Port Size
Full Port, orifice 0.50 inches, Cv 10
Pressure Rating
600 PSI CWP non-shock (see P/T chart),
Vacuum service to 29"Hg, 25 PSI steam with kit
Vacuum service to 29"Hg, 25 PSI steam with kit
Media Working Temperature
0 to 158 °F (-18 to 70 °C)
media 0 to 266 °F (-18 to 130 °C) with optional high temp. mounting kit
media 0 to 266 °F (-18 to 130 °C) with optional high temp. mounting kit
Actuator Temperature Rating
-4 to 158 °F (-20 to 70 °C)
Valve Temperature Rating
0 to 366 °F (-18 to 185 °C)
Valve Body
Lead Free Brass C69300
Ball and Stem
316 stainless steel
Ball Seats
PTFE (Teflon) energized with FKM (viton)
Stem Seals
PTFE (Teflon) with dual FKM (Viton) seals
Duty Cycle
75%
Enclosure
Anti-corrosive polyamide, SS fasteners
Enclosure Rating
IP67 weatherproof, UV protection
Electrical Connections
DIN plugs with cable entry (included), optional 1/2" conduit plugs
Valve Position Confirmation
2 x SPST auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load
Manual Override
Hand knob
Motor Protection
Electronic over-torque with LED status light
Anti-Condensation Heater
4 watts thermostatically controlled
-
Digital Positioner System
Price: $323.00
Buy 3 or more for $287.00 each
-
Price: $323.00
Buy 3 or more for $287.00 each
-
Failsafe Battery Kit
Price: $277.00
Buy 3 or more for $246.00 each
-
Connectors & Cables
Price: $6.40
Buy 10 or more for $5.76 each
-
Price: $13.84
Buy 10 or more for $12.46 each
-
Price: $23.96
Buy 10 or more for $21.56 each
-
Price: $18.03
Buy 10 or more for $16.23 each
-
High Temperature Mounting Kit
Price: $64.00
Buy 6 or more for $57.60 each
We provide 3D CAD models in Solidworks or STEP file formats for most of our Valworx products.Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.
Related Products
Customer
Technical