Electric Actuated LF Brass Ball Valve 2-1/2", 24 VDC, EPS Positioner
Stock #:
567673ABrand:
ValworxSeries:
5676Mfr Part #:
567673AAvailability: In Stock
List Price: $1250.00
Price: $1,000.00
Buy 3 for $900.00 eachPrice: $1,000.00
Usually Ships: 5-7 Days
Free Shipping on orders over $99
Free Shipping on orders over $99
- Description
- Specifications
- Accessories
- Data Sheets
- CAD
- Video
- Repair Parts
Valworx 567673A electric actuated lead free brass ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. Ideal where lead free and NSF construction are required for potable drinking water as well as other industrial applications. The EPS- Electronic Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. Valve can be set to fail closed, in-place or open with loss of control signal. The valve will remain in the last known position with loss of electric power.
The positioning module is self-calibrating and fully potted to help protect the electronics against vibration and moisture. Valve position can be monitored with onboard analog output signal.
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.
Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI max. with kit.
Ball Valve Standard FeaturesLead free brass body 300 PSI working pressure (see P/T chart) Direct mount ball valve per ISO5211 Full port design for unrestricted flow 316 Stainless steel ball and stem Blow out proof stem Energized PTFE ball seats for lower torque and extended cycle life Leak free triple PTFE/Viton stem seal packing Certified per NSF372 and NSF 61 for potable/drinking water
Electric Actuator Standard FeaturesEPS-Electronic Positioning System with 4-20mA input Quarter turn operation with mechanical limits Rugged Type 4X weatherproof aluminum alloy housing Visual valve position indicator Manual override Heavy duty motor with overload protection Thermostatically controlled anti-condensation heater Analog output signal to confirm valve position Self-locking all metal gear drive, no additional brake required CSA Listed per UL429 and CSA C22.2, CE marked
Options (see Accessories tab)
The positioning module is self-calibrating and fully potted to help protect the electronics against vibration and moisture. Valve position can be monitored with onboard analog output signal.
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.
Maximum media working temperature is 158 °F (70 °C). Order optional high temperature valve mounting kit to extend media working temperature up to 266 °F (130 °C). Suitable for steam service up to 25 PSI max. with kit.
Ball Valve Standard Features
Electric Actuator Standard Features
Options (see Accessories tab)
| Type | 2-way with EPS Positioner |
| Voltage | 24 VDC |
| Current Rating | 1.0A @ 24VDC (full load amps) |
| Input Control Signal | 4-20mA |
| Cycle Time | 30 seconds per 90° rotation (no load) |
| Pipe Size | 2-1/2" NPT female |
| Port Size | Full Port, orifice 2.50 inches, Cv 320 |
| Pressure (Max) | 300 PSI (see P/T chart), 25 PSI steam with kit, vacuum service to 29" Hg |
| Media Working Temperature | 0-158 °F (-18 to 70 °C) media 0-266 °F (-18 to 130 °C) with optional valve mounting kit |
| Actuator Temperature Rating | -22 to 140 °F (-30 to +60 °C) |
| Valve Temperature Rating | 0 to 366 °F (-18 to 185 °C) |
| Valve Body | Lead Free Brass |
| Ball and Stem | 316 stainless steel |
| Ball Seats | PTFE (Teflon) energized with FKM (viton) |
| Stem Seals | PTFE (Teflon) with dual FKM (viton) seals |
| Duty Cycle | 70% |
| Enclosure | Aluminum alloy, polyester coating, SS fasteners |
| Enclosure Rating | Type 4X (IP67) weatherproof |
| Electrical Connections | Terminal strip, 1/2" NPT conduit / cable connector (included) |
| Valve Position Confirmation | 4-20mA output monitoring signal (same type as input signal) |
| Manual Override | 5mm hex drive with protective cover |
| Motor Protection | Current sensor |
| Anti-Condensation Heater | 4 watts thermostatically controlled |
| Approvals - Actuator | CSA Listed. Conforms to UL Std 429, Certified to CSA Std C22.2 No. 139, CE mark |
| Approvals - Valve | IAPMO certified to NSF/ANSI 372 and NSF/ANSI 61 drinking water, MSS-SP-110 |
| Weight | 18.7 lbs (8.5 kg) |
-
High Temperature Mounting Kit -
Connectors and Cables 
Conduit Adapter 1/2" NPT for 5618 Series Electric Actuators
Stock #: 561890Price: $6.40
Buy 3 for $5.76 each
-
7-Conductor Cable for 5618 Series Electric Actuators- 16ft
Stock #: 588009Price: $23.20
Buy 10 for $20.80 each
We provide 3D CAD models in Solidworks or STEP file formats for most of our Valworx products.Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.
