Electric Actuated PVC Ball Valve 1-1/4", 24 VDC, EPS Positioner

Electric Actuated PVC Ball Valve 1-1/4, 24 VDC, EPS Positioner
Stock #:
565470A
Brand:
Valworx
Series:
5654
Mfr Part #:
565470A
Availability: In Stock

List Price: $970.00
Price: $776.00
Buy 3 for $698.40 each

Usually Ships: Same Day
Free Shipping on orders over $99
Quantity
  • Description
  • Specifications
  • Accessories
  • Data Sheets
  • CAD
  • Video
  • Repair Parts
Valworx 565470A electric actuated PVC ball valves are typically used to control the flow of water and liquid media compatible with the materials of construction (not suitable for air or gas). Ideal where NSF approved construction is required for potable drinking water as well as other industrial applications.

The EPS- Electronic Positioner System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. Valve can be set to fail closed, in-place or open with loss of control signal (4-20mA input). The valve will remain in the last known position with loss of electric power. The positioning module is self-calibrating and fully potted to help protect the electronics against vibration and moisture. Valve position can be monitored with onboard analog output signal.

Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation. Typical applications include industrial/process piping, pulp and paper, food processing, water treatment and irrigation.

Ball Valve Standard Features
  • Industrial grade full port PVC ball valve
  • Tru Union with bi-directional flow
  • Union nut locking device prevents back-off
  • Energized PTFE ball seats for lower torque and extended life
  • Leak free dual stem seal design
  • Micro-adjustable ball seat carrier
  • Pressure rated 232 PSI at 73°F
  • NSF certified for use with potable/drinking water

    Electric Actuator Standard Features
  • EPS-Electronic Positioner System with 4-20mA input
  • Quarter turn operation with mechanical limits
  • Rugged Type 4X weatherproof aluminum alloy housing
  • Visual valve position indicator
  • Manual override
  • Heavy duty motor with overload protection
  • Thermostatically controlled anti-condensation heater
  • Analog output signal to confirm valve position
  • Self-locking all metal gear drive, no additional brake required
  • CSA Listed per UL429 and CSA C22.2, CE marked
  • Type2-way with EPS Positioner
    Voltage24 VDC
    Current Rating1.0A @ 24VDC (full load amps)
    Input Control Signal4-20mA
    Cycle Time30 seconds per 90° rotation (+/- 10% no load)
    Pipe Size1-1/4 inch (both IPS glue socket and NPT end connectors included)
    Port SizeFull Port, Cv 77
    Pressure Rating232 PSI (16 Bar) see P/T chart, Vacuum 29"Hg
    Not suitable for air or gas
    Media Working Temperature32-140 °F (0 to 60 °C)
    Actuator Temperature Rating-22 to 140 °F (-30 to 60 °C)
    Valve Temperature Rating32-140 °F (0 to 60 °C)
    Valve BodyPVC
    Ball and StemPVC
    Ball SeatsPTFE (Teflon) energized with EPDM seals
    Stem Seals Dual EPDM seals
    Duty Cycle70%
    EnclosureAluminum alloy, polyester coating, SS fasteners
    Enclosure RatingType 4X (IP67) weatherproof
    Electrical ConnectionsTerminal strip, 1/2" NPT conduit (optional) / cable connectors (included)
    Valve Position Confirmation4-20mA output monitoring signal (same type as input signal)
    Manual Override5mm hex drive with protective cover
    Motor ProtectionCurrent sensor
    Anti-Condensation Heater4 watts thermostatically controlled
    Approvals - ActuatorCSA Listed. Conforms to UL Std 429, Certified to CSA Std C22.2 No. 139,
    CE mark
    Approvals - ValveCertified NSF 61G and NSF372 for drinking water, ANSI B1.20.1,
    ASTM D1784 and ISO11922-1
    Weight10.6 lbs (4.8 kg)
    We provide 3D CAD models in Solidworks or STEP file formats for most of our Valworx products.

    Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.