Valworx 565475A electric actuated PVC ball valves are typically used to control the flow of water and liquid media compatible with the materials of construction (not suitable for air or gas). Ideal where NSF approved construction is required for potable drinking water as well as other industrial applications.
The EPS- Electronic Positioner System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. Valve can be set to fail closed, in-place or open with loss of control signal (4-20mA input). The valve will remain in the last known position with loss of electric power. The positioning module is self-calibrating and fully potted to help protect the electronics against vibration and moisture. Valve position can be monitored with onboard analog output signal.
Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation. Typical applications include industrial/process piping, pulp and paper, food processing, water treatment and irrigation.
Ball Valve Standard FeaturesIndustrial grade full port PVC ball valve Tru Union with bi-directional flow Union nut locking device prevents back-off Energized PTFE ball seats for lower torque and extended life Leak free dual stem seal design Micro-adjustable ball seat carrier Pressure rated 232 PSI at 73°F NSF certified for use with potable/drinking water
Electric Actuator Standard Features EPS-Electronic Positioner System with 4-20mA input Quarter turn operation with mechanical limits Rugged Type 4X weatherproof aluminum alloy housing Visual valve position indicator Manual override Heavy duty motor with overload protection Thermostatically controlled anti-condensation heater Analog output signal to confirm valve position Self-locking all metal gear drive, no additional brake required CSA Listed per UL429 and CSA C22.2, CE marked
The EPS- Electronic Positioner System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. Valve can be set to fail closed, in-place or open with loss of control signal (4-20mA input). The valve will remain in the last known position with loss of electric power. The positioning module is self-calibrating and fully potted to help protect the electronics against vibration and moisture. Valve position can be monitored with onboard analog output signal.
Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation. Typical applications include industrial/process piping, pulp and paper, food processing, water treatment and irrigation.
Ball Valve Standard Features
Electric Actuator Standard Features
Type
2-way with EPS Positioner
Voltage
24 VDC
Current Rating
1.70A @ 24VDC (full load amps)
Input Control Signal
4-20mA
Cycle Time
30 seconds per 90° rotation (+/- 10% no load)
Pipe Size
4 inch (IPS glue socket end connectors)
Port Size
Full Port, Cv 665
Pressure Rating
232 PSI (16 Bar) see P/T chart, Vacuum 29"Hg
Not suitable for air or gas
Not suitable for air or gas
Media Working Temperature
32-140 °F (0 to 60 °C)
Actuator Temperature Rating
-22 to 140 °F (-30 to 60 °C)
Valve Temperature Rating
32-140 °F (0 to 60 °C)
Valve Body
PVC
Ball and Stem
PVC
Ball Seats
PTFE (Teflon) energized with EPDM seals
Stem Seals
Dual EPDM seals
Duty Cycle
70%
Enclosure
Aluminum alloy, polyester coating, SS fasteners
Enclosure Rating
Type 4X (IP67) weatherproof
Electrical Connections
Terminal strip, 1/2" NPT conduit (optional) / cable connectors (included)
Valve Position Confirmation
4-20mA output monitoring signal (same type as input signal)
Manual Override
6mm hex drive with protective cover
Motor Protection
Current sensor
Anti-Condensation Heater
4 watts thermostatically controlled
-
Connectors and CablesPrice: $7.20
Buy 3 or more for $6.48 each
Quantity -
Price: $23.20
Buy 10 or more for $20.88 each
Quantity -
HandwheelsPrice: $28.00
Buy 3 or more for $25.20 each
Quantity

Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.
