Valworx 565419A electric actuated PVC ball valves are typically used for on-off control of water and liquid media compatible with the materials of construction (not suitable for air or gas). Ideal where NSF certified construction is required for potable drinking water as well as other industrial applications. These actuated valves use power-to-open and power to close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a self-locking all metal gear drive rotates the ball. The motor is stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.
Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation. Two auxiliary limit switches are included to confirm valve open and closed positions. Typical applications include industrial/process piping, pulp and paper, food processing, water treatment and irrigation.
Ball Valve Standard FeaturesIndustrial grade full port PVC ball valve Tru Union with bi-directional flow Union nut locking device prevents back-off Energized PTFE ball seats for lower torque and extended life Leak free dual stem seal design Micro-adjustable ball seat carrier Pressure rated 232 PSI at 73°F Series 5510 valve NSF-certified for use with potable/drinking water
Electric Actuator Standard Features Quarter turn operation with mechanical stops Rugged Type 4X weatherproof aluminum alloy enclosure Visual valve position indicator Manual override Heavy duty motor with overload protection Thermostatically controlled anti-condensation heater Two auxiliary limit switches to confirm valve positions Self-locking all metal gear drive, no additional brake required CSA Listed per UL429 and CSA C22.2, CE mark
Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation. Two auxiliary limit switches are included to confirm valve open and closed positions. Typical applications include industrial/process piping, pulp and paper, food processing, water treatment and irrigation.
Ball Valve Standard Features
Electric Actuator Standard Features
Type
2-way On-Off
Voltage
110 VAC 50/60Hz
Current Rating
0.73A (full load amps)
Cycle Time
30 seconds per 90° rotation (+/- 10% no load)
Pipe Size
4 inch (IPS glue socket end connectors)
Port Size
Full Port, Cv 665
Pressure Rating
232 PSI (16 Bar) see P/T chart, Vacuum 29"Hg
Not suitable for air or gas
Not suitable for air or gas
Media Working Temperature
32-140 °F (0 to 60 °C)
Actuator Temperature Rating
-22 to 140 °F (-30 to 60 °C)
Valve Temperature Rating
32-140 °F (0 to 60 °C)
Valve Body
PVC
Ball and Stem
PVC
Ball Seats
PTFE (Teflon) energized with EPDM seals
Stem Seals
Dual EPDM seals
Duty Cycle
70%
Enclosure
Aluminum alloy, polyester coating, SS fasteners
Enclosure Rating
Type 4X (IP67) weatherproof
Electrical Connections
Terminal strip, 1/2" NPT conduit (optional) / cable connector (included)
Valve Position Confirmation
2 x SPDT auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load
Manual Override
6mm hex drive with protective cover
Motor Protection
Thermal overload
Anti-Condensation Heater
4 watts thermostatically controlled
-
Connectors and Cables
Price: $7.20
Buy 3 or more for $6.48 each
-
Price: $23.20
Buy 10 or more for $20.88 each
-
Handwheels
Price: $28.00
Buy 3 or more for $25.20 each
We provide 3D CAD models in Solidworks or STEP file formats for most of our Valworx products.Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.
Related Products
Customer
Technical