Select the desired V-port vertex angle (30°, 60°, or 90°) from the Accessories tab.
Valworx 550204 electric actuated stainless steel v-port valves are designed for applications requiring precise flow control. Suitable for use with water, air, oil, and other media compatible with the materials of construction. The valve has a unique three piece investment cast bolted body design with the advantage of a swing out body for easy inline maintenance. The EPS- Electronic Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the control input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. The valve will remain in the last known position with loss of electric power.
The positioning module is self-calibrating and fully potted to help protect the electronics against vibration and moisture. Valve position can be monitored with onboard analog output signal.
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation. All valves trested per API 598.
High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Modbus control is available as a factory-installed option. Click on the Accessories tab for details.
Ball Valve Standard Features
1000 PSI working pressure (see P/T chart)Direct mounting valve per ISO5211V-port valves available in 30, 60 & 90° vertex angles316 stainless steel body, ball and stemBlow out proof stemRTFE ball seats extend cycle lifeTriple PTFE/Viton stem seal design, live loaded
Electric Actuator Standard FeaturesEPS-Electronic Positioning System with 4-20mA inputQuarter turn operation with mechanical limitsRugged Type 4X weatherproof aluminum alloy housingVisual valve position indicatorManual overrideHeavy duty motor with overload protectionThermostatically controlled anti-condensation heaterAnalog output signal to confirm valve positionSelf-locking all metal gear drive, no additional brake requiredCSA Listed per UL429 and CSA C22.2, CE marked
Options (see Accessories tab)
| Type | Electric Actuated V-Port Ball Valve- Positioner |
|---|
| Voltage | 24 VDC |
|---|
| Current Rating | 1.0A (full load amps) |
|---|
| Input Control Signal | 4-20mA |
|---|
| Cycle Time | 20 seconds per 90° rotation (no load) |
|---|
| Pipe Size | 1/2" NPT female |
|---|
| Port Size | V-Port, orifice 0.6 inches, Cv 2.4/5.5/6.9 Vertex Angle 30°/60°/90° |
|---|
| Pressure (Max) | 1000 PSI (see P/T chart),
25 PSI saturated steam with kit, vacuum service to 29" Hg |
|---|
| Valve Temperature Range | -4 to 392 °F (-20 to 200 °C) |
|---|
| Actuator Temperature Range | -13 to 131 °F (-25 to +55 °C) |
|---|
| Valve Body | 316 stainless steel |
|---|
| Ball | 316 stainless steel |
|---|
| Stem Seals | PTFE/ Viton (live loaded and adjustable) |
|---|
| Ball Seats | RTFE (reinforced Teflon) |
|---|
| Duty Cycle | 70% |
|---|
| Enclosure | Aluminum alloy, polyester painted, SS fasteners |
|---|
| Enclosure Rating | Type 4X (IP67) weatherproof |
|---|
| Electrical Connections | Terminal strip, 1/2" NPT conduit / cable connector (included) |
|---|
| Valve Position Confirmation | 4-20mA output monitoring signal (same type as input signal) |
|---|
| Manual Override | 5mm hex drive with protective cover |
|---|
| Motor Protection | Current sensor |
|---|
| Anti-Condensation Heater | 4 watts thermostatically controlled |
|---|
| Max Fluid Velocity | 10 feet per second |
|---|
V-Port Vertex Angle Options
Modbus Control System
Connectors and Cables
Price: $18.40
Buy 3 or more for $16.56 each
Price: $26.80
Buy 10 or more for $24.12 each
Price: $50.40
Buy 10 or more for $45.36 each
Price: $97.60
Buy 10 or more for $87.84 each
High Temperature Mounting Kit
Price: $92.00
Buy 3 or more for $82.80 each
Spring Check Valve
