Valworx 586402 explosion proof 3-way full port lead free ball valves are used to control the flow of water, air, oil, and other media compatible with the materials of construction. These 3-way L-Port valves are used as either diverting or selecting valves. Four ball seat design allows for full pressure at any port. Ideal where lead free and NSF approved construction are required for potable drinking water, or other general industrial applications in hazardous environments. The EPS- Electronic Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. Valve can be set to fail closed, in-place or open with loss of control signal. The valve will remain in the last known position with loss of electric power. There is no flow shutoff position with this type valve.
Valworx does not recommend the use of high temperature brackets with explosion proof actuators.
Actuators certified for UL Class I Div I Groups C & D, and are tested to rigorous UL and CSA standards and certified by CSA.
Ball Valve Standard FeaturesFull port design Lead free brass body 400 PSI working pressure (see P/T chart) Direct mounting valve per ISO5211 Stainless steel ball and stem Four ball seat design allows for full pressure at any port Energized PTFE ball seats for extended cycle life and reduced torque Leak free triple PTFE/Viton stem seal design Certified per NSF372 and NSF61 for use with potable/drinking water
Electric Actuator Standard FeaturesExplosion proof rated for UL Class I Div I Groups C & D, Ex db IIC T5 Gb Class 1 Zone 1, AEx db IIC T5 Gbs Rugged Type 4X weatherproof aluminum alloy enclosure Visual valve position indicator Manual override Heavy duty motor with overload protection Self-locking all metal gear drive, no additional brake required CSA Listed per UL429 and CSA C22.2, CE mark as well as ExP ratings listed above
Options (see Accessories tab)
Valworx does not recommend the use of high temperature brackets with explosion proof actuators.
Actuators certified for UL Class I Div I Groups C & D, and are tested to rigorous UL and CSA standards and certified by CSA.
Ball Valve Standard Features
Electric Actuator Standard Features
Options (see Accessories tab)
| Type | Explosion Proof Electric Actuated 3 Way Ball Valve- Positioner |
|---|---|
| Voltage | 110 VAC 50/60 Hz |
| Current Rating | 0.27A (full load amps) |
| Cycle Time | 20 seconds per 90° rotation (no load) |
| Pipe Size | 1/4" NPT female |
| Port Size | Full Port, orifice 0.39 inches, Cv 3.2 |
| Pressure (Max) | 400 PSI CWP non-shock (see P/T chart), Vacuum service to 29" Hg |
| Valve Temperature Range | 0 to 344 °F (-18 to 173 °C) |
| Actuator Temperature Range | -13 to +131 °F (-25 to +55 °C) |
| Valve Body | Lead Free Brass C69300 |
| Ball and Stem | 316 stainless steel |
| Stem Seals | PTFE (Teflon) with dual FKM (Viton) seals |
| Ball Seats | (4) PTFE (Teflon) energized with FKM (Viton) |
| Enclosure | Aluminum alloy, polyester painted, SS fasteners |
| Duty Cycle | 70% |
| Enclosure | Aluminum alloy, polyester coating, SS fasteners |
| Enclosure Rating | Type 4X (IP67) weatherproof |
| Electrical Connections | Two 1/2" NPT threaded ports. Requires Exp rated connector or pipe (not included) |
| Valve Position Confirmation | 4-20mA output monitoring signal (same type as input signal) |
| Manual Override | 5mm hex drive with protective cover |
| Motor Protection | Thermal overload |
| Explosion Proof | UL Class I Div I Groups C & D, Ex db IIC T5 Gb Class 1 Zone 1, AEx db IIC T5 Gb |
| Max Fluid Velocity | 10 feet per second |
-
Explosion Proof NPT Plug
Price: $22.94
Buy 3 or more for $20.65 each
-
Spring Check Valve
5864/5865 Series Product Data Sheet 5818 Series Explosion Proof Actuators - Installation Instructions 5818 Series Explosion Proof Certificate of Compliance IAPMO Certification to NSF/ANSI 61 Potable Drinking Water IAPMO Certification to NSF/ANSI 372 Lead FreeWe provide CAD models in virtually every format. Can't find exactly what you're looking for? Please email sales@valworx.com to request the specific files you need. Include the stock number and any accessories with your request.
Note: Fusion360 users must have Fusion360 open in order to download.
Note: if you are not seeing a list of CAD formats in the drop down menu, try clearing your browser's cache.
Displaying the model may take a few seconds.
powered by TraceParts
-
Price: $40.26
Buy 3 or more for $36.24 each
-
Explosion Proof Actuator 442 in.lbs (50Nm), 110 VAC, EPS Positioner Stock #: 581856Usually Ships: Same DayPrice: $1,232.00
Buy 3 or more for $1,108.80 each