3/4" Explosion Proof 3-way Brass L-Diverter Valve 110 VAC, EPS Positioner

Stock #: 586406
Brand: Valworx
Series: 5864
List Price: $1614.00
Price: $1,291.20
Buy 3 or more for $1,162.08 each
Usually Ships: Same Day
Free Shipping on orders over $99
Valworx 586406 explosion proof 3-way full port lead free ball valves are used to control the flow of water, air, oil, and other media compatible with the materials of construction. These 3-way L-Port valves are used as either diverting or selecting valves. Four ball seat design allows for full pressure at any port. Ideal where lead free and NSF approved construction are required for potable drinking water, or other general industrial applications in hazardous environments. The EPS- Electronic Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. Valve can be set to fail closed, in-place or open with loss of control signal. The valve will remain in the last known position with loss of electric power. There is no flow shutoff position with this type valve.

Valworx does not recommend the use of high temperature brackets with explosion proof actuators.

Actuators certified for UL Class I Div I Groups C & D, and are tested to rigorous UL and CSA standards and certified by CSA.

Ball Valve Standard Features
  • Full port design
  • Lead free brass body
  • 400 PSI working pressure (see P/T chart)
  • Direct mounting valve per ISO5211
  • Stainless steel ball and stem
  • Four ball seat design allows for full pressure at any port
  • Energized PTFE ball seats for extended cycle life and reduced torque
  • Leak free triple PTFE/Viton stem seal design
  • Certified per NSF372 and NSF61 for use with potable/drinking water

  • Electric Actuator Standard Features
  • Explosion proof rated for UL Class I Div I Groups C & D, Ex db IIC T5 Gb Class 1 Zone 1, AEx db IIC T5 Gbs
  • Rugged Type 4X weatherproof aluminum alloy enclosure
  • Visual valve position indicator
  • Manual override
  • Heavy duty motor with overload protection
  • Self-locking all metal gear drive, no additional brake required
  • CSA Listed per UL429 and CSA C22.2, CE mark as well as ExP ratings listed above

  • Options (see Accessories tab)
    TypeExplosion Proof Electric Actuated 3 Way Ball Valve- Positioner
    Voltage110 VAC 50/60 Hz
    Current Rating0.27A (full load amps)
    Cycle Time20 seconds per 90° rotation (no load)
    Pipe Size3/4" NPT female
    Port SizeFull Port, orifice 0.75 inches, Cv 10.0
    Pressure (Max)400 PSI CWP non-shock (see P/T chart),
    Vacuum service to 29" Hg
    Valve Temperature Range0 to 344 °F (-18 to 173 °C)
    Actuator Temperature Range-13 to +131 °F (-25 to +55 °C)
    Valve BodyLead Free Brass C69300
    Ball and Stem316 stainless steel
    Stem Seals PTFE (Teflon) with dual FKM (Viton) seals
    Ball Seats(4) PTFE (Teflon) energized with FKM (Viton)
    EnclosureAluminum alloy, polyester painted, SS fasteners
    Duty Cycle70%
    EnclosureAluminum alloy, polyester coating, SS fasteners
    Enclosure RatingType 4X (IP67) weatherproof
    Electrical ConnectionsTwo 1/2" NPT threaded ports. Requires Exp rated connector or pipe (not included)
    Valve Position Confirmation4-20mA output monitoring signal (same type as input signal)
    Manual Override5mm hex drive with protective cover
    Motor ProtectionThermal overload
    Explosion ProofUL Class I Div I Groups C & D, Ex db IIC T5 Gb Class 1 Zone 1, AEx db IIC T5 Gb
    Max Fluid Velocity10 feet per second
    • 1/2
      1/2" NPT Plug for 5818 Series Explosion Proof Actuators Stock #: 581891
      Usually Ships: Same Day
      Price: $22.94
      Buy 3 or more for $20.65 each
      Quantity
    We provide 3D CAD models in Solidworks or STEP file formats for most of our Valworx products.

    Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.