Valworx 586703 explosion proof 3-way full port lead free ball valves are used to control the flow of water, air, oil, and other media compatible with the materials of construction. These 3-way T-Port valves are typically used as diverter, selector or mixing valves. Four ball seat design allows for full pressure at any port. Ideal where lead free and NSF approved construction are required for potable drinking water, or other general industrial applications in hazardous environments. The EPS- Electronic Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. Valve can be set to fail closed, in-place or open with loss of control signal. The valve will remain in the last known position with loss of electric power. There is no flow shutoff position with this type valve.
Valworx does not recommend the use of high temperature brackets with explosion proof actuators.
Actuators certified for UL Class I Div I Groups C & D, and are tested to rigorous UL and CSA standards and certified by CSA.
Ball Valve Standard Features
Full port designLead free brass body400 PSI working pressure (see P/T chart)Direct mounting valve per ISO5211Stainless steel ball and stemFour ball seat design allows for full pressure at any portEnergized PTFE ball seats for extended cycle life and reduced torqueLeak free triple PTFE/Viton stem seal designCertified per NSF372 and NSF61 for use with potable/drinking water
Electric Actuator Standard FeaturesExplosion proof rated for UL Class I Div I Groups C & D, Ex db IIC T5 Gb Class 1 Zone 1, AEx db IIC T5 GbsRugged Type 4X weatherproof aluminum alloy enclosureVisual valve position indicatorManual overrideHeavy duty motor with overload protectionSelf-locking all metal gear drive, no additional brake requiredCSA Listed per UL429 and CSA C22.2, CE mark as well as ExP ratings listed above
Options (see Accessories tab)
Type | Explosion Proof Electric Actuated 3 Way Brass Valve- Positioner |
Voltage | 24 VDC, EPS Positioner |
Current Rating | 1.8A (full load amps) |
Cycle Time | 20 seconds per 90° rotation (no load) |
Pipe Size | 3/8" NPT female |
Port Size | Full Port, orifice 0.39 inches, Cv 3.5 |
Pressure (Max) | 400 PSI CWP non-shock (see P/T chart), Vacuum service to 29" Hg |
Valve Temperature Range | 0 to 344 °F (-18 to 173 °C) |
Actuator Temperature Range | -13 to +131 °F (-25 to +55 °C) |
Valve Body | Lead Free Brass C69300 |
Ball and Stem | 316 stainless steel |
Stem Seals | PTFE (Teflon) with dual FKM (Viton) seals |
Ball Seats | (4) PTFE (Teflon) energized with FKM (Viton) |
Enclosure | Aluminum alloy, polyester painted, SS fasteners |
Duty Cycle | 70% |
Enclosure | Aluminum alloy, polyester coating, SS fasteners |
Enclosure Rating | Type 4X (IP67) weatherproof |
Electrical Connections | Two 1/2" NPT threaded ports. Requires Exp rated connector or pipe (not included) |
Valve Position Confirmation | 4-20mA output monitoring signal (same type as input signal) |
Manual Override | 5mm hex drive with protective cover |
Motor Protection | Thermal overload |
Explosion Proof | UL Class I Div I Groups C & D, Ex db IIC T5 Gb Class 1 Zone 1, AEx db IIC T5 Gb |
Max Fluid Velocity | 10 feet per second |
Explosion Proof NPT Plug
Price: $22.94
Buy 3 or more for $20.65 each