Explosion Proof Pressure Transducer 100 PSI,4-20mA

Explosion Proof Pressure Transducer 100 PSI,4-20mA
Stock #:
34605
Brand:
Wika
Series:
E-10
Mfr Part #:
4365050
Availability: In Stock

Price: $438.00
Buy 3 for $416.10 each

Usually Ships: 1-3 Days
Free Shipping on orders over $99
Quantity
  • Description
  • Specifications
  • Data Sheets
Wika explosion proof pressure transmitters (pressure transducers) provide a 4-20 mA output that is both linear and proportional to the applied pressure. The output signal is sent to computers, chart recorders, PLC's, digital panel meters or other devices to display, record and/or change the system being monitored. These rugged transmitters are FM-approved explosion proof for Class 1, Division 1 hazardous locations. Each unit is quality control tested and calibrated to achieve an accuracy of 0.25% of span (BFSL). Extremely resistant to pressure spikes, vibration, and moisture intrusion. Each unit is temperature compensated to assure accuracy and long term stability under severe ambient temperature variations. NACE MR0175 compliant. Typical applications might include wellhead monitoring, refining, chemical, petrochemical, offshore platforms, and pipelines.
Input Pressure0-100 PSI
Electrical Output4-20 mA 2-wire
Pressure Connection1/2" NPT male
Excitation11-29 VDC power supply
Electrical Load LimitResistance=(supply voltage-10 volts)/0.02 A
Maximum Pressure500 PSI
Burst Pressure500 PSI
Accuracy0.25% of span BFSL (Hysteresis 0.1%, Repeatability 0.05%)
Response Time1 ms
Temperature RangeMedia -22 °F to 212 °F, Ambient -22 °F to 212 °F
Temp Compensated32 °F to 176 °F
Electrical Connection1/2" male conduit with 6 foot shielded cable
Electrical ProtectionProtection against reverse polarity, short circuit and overvoltage
Agency ApprovalsFactory Mutual (FM/CSA) for Class 1, Division 1, Group A,B,C,D and Class II/III, Div. 1, Group E,F,G
Ingress ProtectionNEMA 4X/IP67
Internal Transmitting FluidSynthetic oil
Wetted Parts316 Stainless Steel (parts in contact with media)
Case Material316 Stainless Steel
Weight0.4 pounds