Valworx 585803 explosion proof 3-piece stainless steel ball valve is used for positioning control of water, air, oil, and other media compatible with the materials of construction. Unique three piece investment cast bolted body design offers the advantage of a swing out body for easy inline maintenance. Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the control input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. The valve will remain in the last known position with loss of electric power.
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Valworx does not recommend the use of high temperature brackets with explosion proof actuators. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators certified for UL Class I Div I Groups C & D, and are tested to rigorous UL and CSA standards and certified by CSA.
Ball Valve Standard Features1000 PSI working pressure (see P/T chart) 3-piece swing out design for easy maintenance Direct mounting valve per ISO5211 Full port for unrestricted flow 316 stainless steel body, ball and stem Blow out proof stem RTFE ball seats extend cycle life Triple PTFE/Viton stem seal design, live loaded
Electric Actuator Standard FeaturesExplosion proof rated for UL Class I Div I Groups C & D, Ex db IIC T5 Gb Class 1 Zone 1, AEx db IIC T5 Gbs Rugged Type 4X weatherproof aluminum alloy enclosure Visual valve position indicator Manual override Heavy duty motor with overload protection Self-locking all metal gear drive, no additional brake required CSA Listed per UL429 and CSA C22.2, CE mark as well as ExP ratings listed above
Options (see Accessories tab)
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Valworx does not recommend the use of high temperature brackets with explosion proof actuators. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators certified for UL Class I Div I Groups C & D, and are tested to rigorous UL and CSA standards and certified by CSA.
Ball Valve Standard Features
Electric Actuator Standard Features
Options (see Accessories tab)
Type | Explosion Proof Electric Actuated 3 Piece Ball Valve- Positioner |
---|---|
Voltage | 110 VAC 50/60 Hz |
Current Rating | 0.27A |
Cycle Time | 20 seconds per 90° rotation (no load) |
Pipe Size | 3/8" NPT female |
Port Size | Full Port, orifice 0.49 inches, Cv 6.9 |
Pressure (Max) | 1000 PSI (see P/T chart), vacuum service to 29" Hg |
Valve Temperature Range | -4 to 392 °F (-20 to 200 °C) |
Actuator Temperature Range | -13 to 131 °F (-25 to +55 °C) |
Valve Body | 316 stainless steel |
Ball | 316 stainless steel |
Stem Seals | PTFE/ Viton (live loaded and adjustable) |
Ball Seats | RTFE (reinforced Teflon) |
Duty Cycle | 70% |
Enclosure | Aluminum alloy, polyester painted, SS fasteners |
Enclosure Rating | Type 4X (IP67) weatherproof |
Electrical Connections | Two 1/2" NPT threaded ports. Requires Exp rated connector or pipe (not included) |
Valve Position Confirmation | 4-20mA output monitoring signal (same type as input signal) |
Manual Override | 5mm hex drive with protective cover |
Motor Protection | Thermal overload |
Explosion Proof | UL Class I Div I Groups C & D, Ex db IIC T5 Gb Class 1 Zone 1, AEx db IIC T5 Gb |
Max Fluid Velocity | 10 feet per second |
-
Explosion Proof NPT PlugPrice: $22.94
Buy 3 or more for $20.65 each
Quantity -
Spring Check ValvePrice: $24.72
Quantity
5801/5802/5803/5804 Series Product Data Sheet
5818 Series Electric Actuators with EPS Positioner - Installation Instructions
5818 Series Explosion Proof Certificate of Compliance
5818 Series Electric Actuators with EPS Positioner - Installation Instructions
5818 Series Explosion Proof Certificate of Compliance
We provide CAD models in virtually every format. Can't find exactly what you're looking for? Please email sales@valworx.com to request the specific files you need. Include the stock number and any accessories with your request.
Note: Fusion360 users must have Fusion360 open in order to download.
Note: if you are not seeing a list of CAD formats in the drop down menu, try clearing your browser's cache.
Displaying the model may take a few seconds.
powered by TraceParts