3/8" Explosion Proof 3-Way Stainless L-Diverter Valve, 110 VAC, EPS Positioner

Stock #: 584603
Brand: Valworx
Series: 5846
List Price: $1627.00
Price: $1,301.60
Buy 3 or more for $1,171.44 each
Usually Ships: Same Day
Free Shipping on orders over $99
Valworx 584602 Explosion Proof 3-way Full Port stainless steel ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. Use as an L-port diverter valve (directs flow from center inlet port to either side outlet port 1 or 2) or as a selector valve (two separate inlet ports and one center outlet port). There is no flow shutoff position with this type valve. Actuator uses power-to-open (position 2) and power-to-close (position 1), stays in last known position with loss of power. The EPS- Electronic Positioning System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the control input signal results in a corresponding and proportional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. The valve will remain in the last known position with loss of electric power.

The positioning module is self-calibrating and fully potted to help protect the electronics against vibration and moisture. Valve position can be monitored with onboard analog output signal.

The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Valworx does not recommend the use of high temperature brackets with explosion proof actuators. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators certified for UL Class I Div I Groups C & D, and are tested to rigorous UL and CSA standards and certified by CSA.

Ball Valve Standard Features
  • 1000 PSI working pressure (see P/T chart)
  • Direct mounting valve per ISO5211
  • Full port design
  • 316 stainless steel body, ball and stem
  • Four ball seat design allows for Full Pressure at any port
  • RTFE ball seats for extended cycle life
  • Triple PTFE/Viton stem seal design, live loaded and adjustable

  • Electric Actuator Standard Features
  • Explosion proof rated for UL Class I Div I Groups C & D, Ex db IIC T5 Gb Class 1 Zone 1, AEx db IIC T5 Gbs
  • Rugged Type 4X weatherproof aluminum alloy enclosure
  • Visual valve position indicator
  • Manual override
  • Heavy duty motor with overload protection
  • Analog output signal to confirm valve position
  • Self-locking all metal gear drive, no additional brake required
  • CSA Listed per UL429 and CSA C22.2, CE mark as well as ExP ratings listed above

  • Options (see Accessories tab)
    TypeExplosion Proof Electric Actuated 3 Way Valve- Positioner
    Voltage110 VAC 50/60 Hz
    Current Rating0.27A (full load amps)
    Cycle Time20 seconds per 90° rotation (no load)
    Pipe Size3/8" NPT female
    Port SizeFull Port, orifice 0.4 inches, Cv 7.3
    Pressure (Max)1000 PSI (see P/T chart), 25 PSI steam with kit, vacuum service to 29" Hg
    Valve Temperature Range-4 to 392 °F (-20 to 200 °C)
    Actuator Temperature Range-13 to 131 °F (-25 to +55 °C)
    Valve Body316 stainless steel
    Ball316 stainless steel
    Stem Seals PTFE/ Viton
    Ball SeatsRTFE (reinforced Teflon)
    Duty Cycle70%
    EnclosureAluminum alloy, polyester painted, SS fasteners
    Enclosure RatingType 4X (IP67) weatherproof
    Electrical ConnectionsTwo 1/2" NPT threaded ports. Requires Exp rated connector or pipe (not included)
    Valve Position Confirmation4-20mA output monitoring signal (same type as input signal)
    Manual Override5mm hex drive with protective cover
    Motor ProtectionThermal overload
    Explosion ProofUL Class I Div I Groups C & D, Ex db IIC T5 Gb Class 1 Zone 1, AEx db IIC T5 Gb
    Max Fluid Velocity10 feet per second
    • 1/2
      1/2" NPT Plug for 5818 Series Explosion Proof Actuators Stock #: 581891
      Usually Ships: Same Day
      Price: $22.94
      Buy 3 or more for $20.65 each
      Quantity
    We provide 3D CAD models in Solidworks or STEP file formats for most of our Valworx products.

    Please email sales@valworx.com to request the specific files you need. Include the stock number of the valve and any accessories with your request.