Valworx 565647C electric actuated 3-way T-port PVC ball valves are typically used as a diverter valve to control the flow of water and other liquid media compatible with the materials of construction (not suitable for air or gas). Ideal for applications where NSF certified construction is required for potable drinking water as well as other industrial applications. Actuator uses power-to-open (position 2) and power-to-close (position 1), stays in the last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via an all metal gear drive rotates the ball valve. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.
Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation. Two auxiliary limit switches are provided to confirm valve position. Typical applications include industrial/process piping, pulp and paper, food processing, water treatment and irrigation.
Ball Valve Standard FeaturesIndustrial grade full port PVC ball valve Tru Union nuts with locking device prevents back-off Energized PTFE ball seats for lower torque and extended life Four ball seat design allows for full pressure at any port Leak free dual stem seal design Micro-adjustable ball seat carrier Pressure rated 232 PSI at 73°F Series 5514 NSF/ANSI/CAN 60 and NSF/ANSI 372 certified valve for use with potable drinking water Includes IPS glue sockets and NPT end connectors
Electric Actuator Standard FeaturesQuarter turn operation with mechanical limits Rugged Type 4X weatherproof aluminum alloy housing Visual valve position indicator Manual override Heavy duty motor with overload protection Thermostatically controlled anti-condensation heater Two auxiliary limit switches to confirm valve position Self-locking all metal gear drive, no additional brake required CSA Listed per UL429 and CSA C22.2, CE mark
Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation. Two auxiliary limit switches are provided to confirm valve position. Typical applications include industrial/process piping, pulp and paper, food processing, water treatment and irrigation.
Ball Valve Standard Features
Electric Actuator Standard Features
Type | Electric Actuated PVC 3 Way Valve- On/Off |
---|---|
Voltage | 24 VDC |
Current Rating | 1.28A @ 24VDC (full load amps) |
Cycle Time | 20 seconds per 90° rotation (+/- 10% no load) |
Pipe Size | 3/4 inch (both IPS glue socket and NPT end connectors included) |
Port Size | Full Port, Cv 10 |
Pressure Rating | 232 PSI (16 Bar) see P/T chart, Vacuum 29"Hg Not suitable for air or gas |
Valve Temperature Range | 32-140 °F (0 to 60 °C) |
Actuator Temperature Range | -13 to +131 °F (-25 to +55 °C) |
Valve Body | PVC |
Ball and Stem | PVC |
Ball Seats | PTFE (Teflon) energized with EPDM seals |
Stem Seals | Dual EPDM seals |
Duty Cycle | 70% |
Enclosure | Aluminum alloy, polyester coating, SS fasteners |
Enclosure Rating | Type 4X (IP67) weatherproof |
Electrical Connections | Terminal strip, 1/2" NPT conduit (optional) / cable connector (included) |
Valve Position Confirmation | 2 x SPDT auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load |
Manual Override | 5mm hex drive with protective cover |
Motor Protection | Current sensor |
Anti-Condensation Heater | 4 watts thermostatically controlled |
-
Connectors and CablesPrice: $18.40
Buy 3 or more for $16.56 each
Quantity -
Price: $26.80
Buy 10 or more for $24.12 each
Quantity -
Price: $50.40
Buy 10 or more for $45.36 each
Quantity -
Price: $97.60
Buy 10 or more for $87.84 each
Quantity
5656 Series Product Data Sheet
5656 Quick Close Series Product Data Sheet
5618 Series On/Off Electric Actuators - Installation Instructions
NSF Certification to NSF/ANSI 61 Potable Drinking Water and NSF/ANSI 372 Lead Free
5656 Quick Close Series Product Data Sheet
5618 Series On/Off Electric Actuators - Installation Instructions
NSF Certification to NSF/ANSI 61 Potable Drinking Water and NSF/ANSI 372 Lead Free
We provide CAD models in virtually every format. Can't find exactly what you're looking for? Please email sales@valworx.com to request the specific files you need. Include the stock number and any accessories with your request.
Note: Fusion360 users must have Fusion360 open in order to download.
Note: if you are not seeing a list of CAD formats in the drop down menu, try clearing your browser's cache.
Displaying the model may take a few seconds.
powered by TraceParts