Valworx 540708 electric actuated PVC butterfly valves are typically used for control of water and liquid media compatible with the materials of construction. Ideal where NSF certified construction is required for potable drinking water as well as other industrial applications.
The EPS- Electronic Positioner System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the input signal results in a corresponding and proDiscional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. Valve can be set to fail closed, in-place or open with loss of control signal (4-20mA input). The valve will remain in the last known position with loss of electric power. The positioning module is self-calibrating and fully potted to help protect the electronics against vibration and moisture. Valve position can be monitored with onboard analog output signal.
Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation. Typical applications include industrial/process piping, pulp and paper, food processing, water treatment and irrigation.
Modbus control is available as a factory-installed option. Click on the Accessories tab for details.
PVC butterfly valves should never be used for compressed gas applications.
Butterfly Valve Standard FeaturesIndustrial grade PVC butterfly valve Pressure rated 150psi at 73°F Polypropylene (PP) disc ANSI 150 wafer-style flange connection 316 stainless steel shaft EPDM primary liner Series 5402 NSF/ANSI/CAN 60 and NSF/ANSI 372 certified valve for potable drinking water
Electric Actuator Standard Features Quarter turn operation with mechanical stops Rugged Type 4X weatherproof aluminum alloy enclosure Visual valve position indicator Manual override Heavy duty motor with overload protection Thermostatically controlled anti-condensation heater Analog output signal to confirm valve position Self-locking all metal gear drive, no additional brake required CSA Listed per UL429 and CSA C22.2, CE mark
The EPS- Electronic Positioner System provides an accurate valve positioning function whereby the movement of the actuator is controlled by a 4-20mA input control signal. Any change in the input signal results in a corresponding and proDiscional change in the position of the ball. The internal microprocessor and closed loop feedback system continuously monitors and maintains accurate valve position. Valve can be set to fail closed, in-place or open with loss of control signal (4-20mA input). The valve will remain in the last known position with loss of electric power. The positioning module is self-calibrating and fully potted to help protect the electronics against vibration and moisture. Valve position can be monitored with onboard analog output signal.
Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation. Typical applications include industrial/process piping, pulp and paper, food processing, water treatment and irrigation.
Modbus control is available as a factory-installed option. Click on the Accessories tab for details.
PVC butterfly valves should never be used for compressed gas applications.
Butterfly Valve Standard Features
Electric Actuator Standard Features
| Type | Electric Actuated PVC Butterfly Valve- Positioner |
|---|---|
| Voltage | 110 VAC 50/60Hz |
| Current Rating | 0.73A (full load amps) |
| Input Control Signal | 4-20mA |
| Cycle Time | 30 seconds per 90° rotation (+/- 10% no load) |
| Pipe Size | 6 inch |
| Cv | 1309 |
| Pressure Rating | 150 PSI (10 Bar) see P/T chart (not suitable for air or gas) |
| Valve Temperature Range | 32 to 140 °F (0 to 60 °C) |
| Actuator Temperature Range | -13 to +131 °F (-25 to +55 °C) |
| Valve Body | PVC |
| Disc | PP |
| Shaft | 316 Stainless Steel |
| Primary Liner | EPDM |
| Duty Cycle | 70% |
| Enclosure | Aluminum alloy, polyester coating, SS fasteners |
| Enclosure Rating | Type 4X (IP67) weatherproof |
| Electrical Connections | Terminal strip, 1/2" NPT conduit (optional) / cable connector (included) |
| Valve Position Confirmation | 4-20mA output monitoring signal (same type as input signal) |
| Manual Override | 5mm hex drive with protective cover |
| Motor Protection | Thermal overload |
| Anti-Condensation Heater | 4 watts thermostatically controlled |
-
Modbus Control System
-
Connectors and Cables
Price: $18.40
Buy 3 or more for $16.56 each
-
Price: $26.80
Buy 10 or more for $24.12 each
-
Price: $50.40
Buy 10 or more for $45.36 each
-
Price: $97.60
Buy 10 or more for $87.84 each
-
Handwheels
Hand Wheel for Manual Override 5618 Electric Actuators (100/200 Nm sizes) Stock #: 561891Usually Ships: Same DayPrice: $35.20
Buy 3 or more for $31.68 each
5407/5409 Series Product Data Sheet 5618 Series Electric Actuators with EPS Positioner - Installation Instructions NSF Certification to NSF/ANSI 61 Potable Drinking Water and NSF/ANSI 372 Lead FreeWe provide CAD models in virtually every format. Can't find exactly what you're looking for? Please email sales@valworx.com to request the specific files you need. Include the stock number and any accessories with your request.
Note: Fusion360 users must have Fusion360 open in order to download.
Note: if you are not seeing a list of CAD formats in the drop down menu, try clearing your browser's cache.
Displaying the model may take a few seconds.
powered by TraceParts
-
Price: $606.40
Buy 3 or more for $545.76 each
-
Electric Actuator 1770 in.lbs (200Nm), 110 VAC, EPS Positioner Stock #: 561876AUsually Ships: Same DayPrice: $1,696.00
Buy 3 or more for $1,526.40 each