Valworx 560802J electric actuated 3-way L-port stainless steel ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. These FULL PORT valves can be used as either a diverter valve or selector valve. Actuator uses power-to-open (position 2) and power-to-close (position 1), stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a self-locking gear drive rotates the ball one quarter turn. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.
The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Anti-condensation heater will help protect actuator against damage caused by condensation. Two limit switches are provided to confirm valve position. Manual override can be used to operate valve during setup or with loss of electrical power.
High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Advantages of electric actuated ball valves over other type valves may include: higher flow rates, higher pressures, higher temperatures, wider media compatibility, full port flow path, and reduced water hammer.
Ball Valve Standard Features1000 PSI working pressure (see P/T chart) Full port design 316 stainless steel body, ball and stem Four ball seat design allows for full pressure at any port RTFE ball seats for extended cycle life Triple PTFE/Viton stem seal design, live loaded and adjustable Valve direct mounts to actuator per ISO5211
Electric Actuator Standard FeaturesMulti-voltage with auto-voltage sensing Electronic over torque protection Anti-condensation heater External LED diagnostic light Manual override Highly visual valve position indicator Electrical connections via DIN plug connectors (included) Auxiliary limit switches used to confirm valve positions Corrosion resistant polyamide IP67 weatherproof enclosure
Options (see Accessories tab)
The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Anti-condensation heater will help protect actuator against damage caused by condensation. Two limit switches are provided to confirm valve position. Manual override can be used to operate valve during setup or with loss of electrical power.
High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Advantages of electric actuated ball valves over other type valves may include: higher flow rates, higher pressures, higher temperatures, wider media compatibility, full port flow path, and reduced water hammer.
Ball Valve Standard Features
Electric Actuator Standard Features
Options (see Accessories tab)
| Type | Electric Actuated 3 Way Valve- Multivoltage |
|---|---|
| Voltage | 24 to 240 Volts AC/DC (1 ph,50/60Hz) auto-voltage sensing |
| Current Rating | 0.3A @ 110VAC, 0.16A @ 240VAC, 1.28A @ 24VAC 0.97A @ 24VDC (full load amps) |
| Cycle Time | 9 seconds per 90° rotation (+/-10% no load) |
| Pipe Size | 1/4" NPT female |
| Port Size | Full Port, orifice 0.43 inches, Cv 5.0 |
| Pressure (Max) | 1000 PSI (see P/T chart), 25 PSI saturated steam with high temp kit, vacuum up to 29inHg |
| Valve Temperature Range | -4 to 392 °F (-20 to 200 °C) |
| Actuator Temperature Range | -4 to +158 °F (-20 to +70 °C) |
| Valve Body | 316 stainless steel |
| Ball and Stem | 316 stainless steel |
| Ball Seats | RTFE (reinforced Teflon) |
| Stem Seals | PTFE (Teflon)/ Viton |
| Duty Cycle | 75% |
| Enclosure | Anti-corrosive polyamide, SS fasteners |
| Enclosure Rating | IP67 weatherproof, UV protection |
| Electrical Connections | DIN plugs with cable entry (included), optional 1/2" conduit plugs |
| Valve Position Confirmation | 2 x SPST auxiliary limit switches rated 3A@125/250VAC, 30VDC resistive load |
| Manual Override | Hand knob |
| Motor Protection | Electronic over-torque with LED status light |
| Anti-Condensation Heater | 4 watts thermostatically controlled |
| Max Fluid Velocity | 10 feet per second |
-
Digital Positioner System
Price: $389.60
Buy 3 or more for $350.64 each
-
Price: $389.60
Buy 3 or more for $350.64 each
-
Failsafe Battery Kit
Price: $408.80
Buy 3 or more for $367.92 each
-
Price: $408.80
Buy 3 or more for $367.92 each
-
Connectors & Cables
Price: $5.60
Buy 10 or more for $5.04 each
-
Price: $14.64
Buy 10 or more for $13.18 each
-
Price: $28.07
Buy 10 or more for $25.26 each
-
Price: $20.83
Buy 10 or more for $18.75 each
-
High Temperature Mounting Kit
Price: $85.60
Buy 6 or more for $77.04 each
-
Spring Check Valve
5608 Series Product Data Sheet 5610/5616 Series On/Off Electric Actuators - Installation Instructions 5610/5616 Series Electric Actuators with DPS Positioner - Installation InstructionsWe provide CAD models in virtually every format. Can't find exactly what you're looking for? Please email sales@valworx.com to request the specific files you need. Include the stock number and any accessories with your request.
Note: Fusion360 users must have Fusion360 open in order to download.
Note: if you are not seeing a list of CAD formats in the drop down menu, try clearing your browser's cache.
Displaying the model may take a few seconds.
powered by TraceParts
-
Price: $124.80
Buy 3 or more for $112.32 each
-
Price: $401.60
Buy 3 or more for $361.44 each