Valworx 563208J electric actuated 3-way T-port stainless steel ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. These FULL PORT valves are typically used as a diverter valve. Actuator uses power-to-open (position 2) and power-to-close (position 1), stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a self-locking gear drive rotates the ball one quarter turn. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.
The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Anti-condensation heater will help protect actuator against damage caused by condensation. Two limit switches are provided to confirm valve position. Manual override can be used to operate valve during setup or with loss of electrical power.
High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Advantages of electric actuated ball valves over other type valves may include: higher flow rates, higher pressures, higher temperatures, wider media compatibility, full port flow path, and reduced water hammer.
Ball Valve Standard Features
1000 PSI working pressure (see P/T chart)Full port design316 stainless steel body, ball and stemFour ball seat design allows for full pressure at any portRTFE ball seats for extended cycle lifeTriple PTFE/Viton stem seal design, live loaded and adjustableValve direct mounts to actuator per ISO5211
Electric Actuator Standard FeaturesMulti-voltage with auto-voltage sensingElectronic over torque protectionAnti-condensation heaterExternal LED diagnostic lightManual override Highly visual valve position indicatorElectrical connections via DIN plug connectors (included)Auxiliary limit switches used to confirm valve positionsCorrosion resistant polyamide IP67 weatherproof enclosure
Options (see Accessories tab)
| Type | Electric Actuated 3 Way Diverter Valve- Multivoltage |
|---|
| Voltage | 24 to 240 Volts AC/DC (1 ph,50/60Hz) auto-voltage sensing |
|---|
| Current Rating | 0.3A @ 110VAC, 0.16A @ 240VAC, 1.28A @ 24VAC
0.97A @ 24VDC (full load amps) |
|---|
| Cycle Time | 9 seconds per 90° rotation (+/-10% no load) |
|---|
| Pipe Size | 1" NPT female |
|---|
| Port Size | Full Port, orifice 1.00 inches, Cv 32 |
|---|
| Pressure (Max) | 1000 PSI (see P/T chart),
25 PSI saturated steam with high temp kit, vacuum up to 29inHg |
|---|
| Valve Temperature Range | -4 to 356 °F (-20 to 180 °C) |
|---|
| Actuator Temperature Range | -4 to +158 °F (-20 to +70 °C) |
|---|
| Valve Body | 316 stainless steel |
|---|
| Ball and Stem | 316 stainless steel |
|---|
| Ball Seats | RTFE (reinforced Teflon) |
|---|
| Stem Seals | PTFE (Teflon)/ Viton |
|---|
| Duty Cycle | 75% |
|---|
| Enclosure | Anti-corrosive polyamide, SS fasteners |
|---|
| Enclosure Rating | IP67 weatherproof, UV protection |
|---|
| Electrical Connections | DIN plugs with cable entry (included), optional 1/2" conduit plugs |
|---|
| Valve Position Confirmation | 2 x SPST auxiliary limit switches rated 3A@125/250VAC,
30VDC resistive load |
|---|
| Manual Override | Hand knob |
|---|
| Motor Protection | Electronic over-torque with LED status light |
|---|
| Anti-Condensation Heater | 4 watts thermostatically controlled |
|---|
| Max Fluid Velocity | 10 feet per second |
|---|
Digital Positioner System
Price: $389.60
Buy 3 or more for $350.64 each
Price: $389.60
Buy 3 or more for $350.64 each
Failsafe Battery Kit
Price: $408.80
Buy 3 or more for $367.92 each
Price: $408.80
Buy 3 or more for $367.92 each
Connectors & Cables
Price: $5.60
Buy 10 or more for $5.04 each
Price: $14.64
Buy 10 or more for $13.18 each
Price: $28.07
Buy 10 or more for $25.26 each
Price: $20.83
Buy 10 or more for $18.75 each
High Temperature Mounting Kit
Price: $86.40
Buy 3 or more for $77.76 each
Spring Check Valve
