Valworx 566502A compact electric actuated 2-piece stainless steel ball valve is used for on-off control of water, air, oil, and other media compatible with the materials of construction. Standard unit is power-to-open (position 1) and power-to-close (position 2), stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a metal gear drive rotates the ball. The motor is stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA.
High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Ball Valve Standard Features
1000 PSI working pressure (see P/T chart)Direct mounting valve per ISO5211Full port for unrestricted flow316 stainless steel body, ball and stemBlow out proof stemRTFE ball seats extend cycle lifeTriple PTFE/Viton stem seal design, live loaded
Electric Actuator Standard FeaturesQuarter turn operationRugged Type 4X weatherproof aluminum alloy housingVisual valve position indicatorManual overrideHeavy duty motor with overload protectionTwo auxiliary limit switches to confirm valve positionAll metal gear driveCSA Listed per UL429 and CSA C22.2, CE mark
Options (see Accessories tab)
Type | Electric Actuated 2 Way Ball Valve- On/Off |
Voltage | 110 VAC 50/60 Hz +/-10% |
Current Rating | 0.38 A (full load amps) |
Cycle Time | 12 seconds per 90° rotation (no load) |
Pipe Size | 1/4" NPT female |
Port Size | Full Port, orifice 0.45 inches, Cv 6.9 |
Pressure (Max) | 1000 PSI (see P/T chart), 25 PSI saturated steam with high temp kit, vacuum service to 29" Hg |
Valve Temperature Range | -4 to 392 °F (-20 to 200 °C) |
Actuator Temperature Range | -22 to +140 °F (-30 to +60 °C) |
Valve Body | 316 stainless steel |
Ball | 316 stainless steel |
Stem Seals | PTFE/ Viton |
Ball Seats | RTFE (reinforced Teflon) |
Duty Cycle | 60% |
Enclosure | Aluminum alloy, polyester painted, SS fasteners |
Enclosure Rating | Type 4X and IP67 weatherproof |
Electrical Connections | Prewired cable with flying leads 3 meter (9.8 feet) |
Valve Position Confirmation | 2 x SPST auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load |
Manual Override | 5mm Hex Drive |
Motor Protection | Thermal overload |
Max Fluid Velocity | 10 feet per second |
High Temperature Mounting Kit
Price: $85.60
Buy 6 or more for $77.04 each
Spring Check Valve