Valworx 565232E electric actuated 2-piece stainless steel ball valve is used for on-off control of water, air, oil, and other media compatible with the materials of construction. Standard unit is power-to-open and power to close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a self-locking gear drive rotates the ball. The motor is stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.
The valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.
High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Ball Valve Standard Features
800 PSI working pressure (see P/T chart)Direct mounting valve per ISO5211Full port for unrestricted flow316 stainless steel body, ball and stemBlow out proof stemRTFE ball seats extend cycle lifeTriple PTFE/Viton stem seal design, live loaded
Electric Actuator Standard FeaturesQuarter turn operation with mechanical limitsRugged Type 4X weatherproof aluminum alloy housingVisual valve position indicatorManual overrideHeavy duty motor with overload protectionThermostatically controlled anti-condensation heaterTwo auxiliary limit switches to confirm valve positionSelf-locking all metal gear drive, no additional brake requiredCSA Listed per UL429 and CSA C22.2, CE mark
Options (see Accessories tab)
| Type | Electric Actuated 2 Way Ball Valve- On/Off |
|---|
| Voltage | 110 VAC 50/60 Hz |
|---|
| Power Consumption | 0.73A |
|---|
| Cycle Time | 30 seconds per 90° rotation (no load) |
|---|
| Pipe Size | 4" NPT female |
|---|
| Port Size | Full Port, orifice 3.94 inches, Cv 710 |
|---|
| Pressure (Max) | 800 PSI (see P/T chart),
25 PSI saturated steam with high temp kit, vacuum service to 29" Hg |
|---|
| Valve Temperature Range | -4 to 392 °F (-20 to 200 °C) |
|---|
| Actuator Temperature Range | -13 to 131 °F (-25 to +55 °C) |
|---|
| Valve Body | 316 stainless steel |
|---|
| Ball | 316 stainless steel |
|---|
| Stem Seals | PTFE/ Viton |
|---|
| Ball Seats | RTFE (reinforced Teflon) |
|---|
| Duty Cycle | 70% |
|---|
| Enclosure | Aluminum alloy, polyester painted, SS fasteners |
|---|
| Enclosure Rating | Type 4X (IP67) weatherproof |
|---|
| Electrical Connections | Terminal strip, 1/2" NPT conduit (optional) / cable connector (included) |
|---|
| Valve Position Confirmation | 2 x SPST auxiliary limit switches rated 3A@121/210VAC,30VDC resistive load |
|---|
| Manual Override | 5mm Hex Drive |
|---|
| Motor Protection | Thermal overload |
|---|
| Anti-Condensation Heater | 4 watts |
|---|
| Max Fluid Velocity | 10 feet per second |
|---|
Quick Close Option
Connectors and Cables
Price: $18.40
Buy 3 or more for $16.56 each
Price: $26.80
Buy 10 or more for $24.12 each
Price: $50.40
Buy 10 or more for $45.36 each
Price: $97.60
Buy 10 or more for $87.84 each
High Temperature Mounting Kit
Price: $120.00
Buy 3 or more for $108.00 each
Handwheels
Price: $35.20
Buy 3 or more for $31.68 each
