Valworx 563832E electric actuated low emission 2-piece 150# flanged stainless steel ball valves for on-off control of oil & gas, water, air and other media compatible with the materials of construction. Dual-certified fire-safe/low emission valve made of 316 stainless steel mounts between standard ANSI 150 pound pipe flanges. Standard unit is power-to-open and power to close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a flat gear system rotates the ball valve. The motor is stopped by internal cams striking micro switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position. High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Ball Valve Standard Features
ANSI Class 150# flangedDirect mounting valve per ISO5211Full port for unrestricted flow316 stainless steel body, ball and stemBlow out proof stemRTFE ball seats extend cycle lifeBraided Graphite/Viton, live loaded
Electric Actuator Standard FeaturesHighly visible LED light gives continuous actuator status indicationMulti-voltage capable with auto-voltage sensingElectronic torque limiter - protects against valve jamsAnti-condensation heaterManual override with dome style visual valve position indicatorAll electrical connections via external DIN plugs (included) - no need to remove coverTwo dry contact limit switches used to confirm open/closed valve positionRugged IP67 weatherproof housing, CE marked
Options (see Accessories tab)
| Type | Electric Actuated Flange Valve- Multivoltage |
|---|
| Voltage | 24 to 240 Volts AC/DC (1 ph,50/60Hz) auto-voltage sensing |
|---|
| Current Rating | 0.8A @ 115V, 0.5A @ 240V, 3.3A @ 24VAC
2.7A @ 24VDC (full load amps) |
|---|
| Cycle Time | 58 seconds per 90° rotation (+/-10% no load) |
|---|
| Pipe Size | 4 inch ANSI 150# Flanged (RF) |
|---|
| Port Size | Full Port, orifice 4.00 inches, Cv 1020 |
|---|
| Pressure (Max) | 275 PSI (see P/T chart),
25 PSI saturated steam with high temp kit, vacuum 29inHg |
|---|
| Valve Temperature Range | -4 to 392 °F (-20 to 200 °C) |
|---|
| Actuator Temperature Range | -4 to 158 °F (-20 to 70 °C) |
|---|
| Valve Body | 316 stainless steel |
|---|
| Ball and Stem | 316 stainless steel |
|---|
| Stem Seals | Braided Graphite/ FKM (Viton) |
|---|
| Ball Seats | RTFE (reinforced Teflon) |
|---|
| Duty Cycle | 75% |
|---|
| Enclosure | Corrosion resistant polyamide, UV protection |
|---|
| Enclosure Rating | IP67 weatherproof |
|---|
| Electrical Connections | DIN plugs with cable entry - included (optional 1/2" conduit or prewired cables) |
|---|
| Valve Position Confirmation | 2 x SPST limit switches 3A @ 125/250VAC, 30VDC resistive load |
|---|
| Manual Override | Hand knob |
|---|
| Motor Protection | Electronic over-torque with LED status light |
|---|
| Anti-Condensation Heater | 4 watts thermostatically controlled |
|---|
| Low Emission | API 641 |
|---|
| Fire Safe | API 607 |
|---|
| Pipeline Use | API 608 |
|---|
| Stem Packing | API 622 |
|---|
| Flange Face to Face | ANSI B16.10 Class 150 |
|---|
| Flange Dimensions | ANSI B16.5 Class 150 |
|---|
| Max Fluid Velocity | 10 feet per second |
|---|
Digital Positioner System
Price: $633.60
Buy 3 or more for $570.24 each
Price: $633.60
Buy 3 or more for $570.24 each
Failsafe Battery Kit
Price: $633.60
Buy 3 or more for $570.24 each
Price: $633.60
Buy 3 or more for $570.24 each
Connectors & Cables
Price: $5.60
Buy 10 or more for $5.04 each
Price: $28.07
Buy 10 or more for $25.26 each
High Temperature Mounting Kit
Price: $120.00
Buy 3 or more for $108.00 each
Spring Check Valve
