Select the desired V-port vertex angle (30°, 60°, or 90°) from the Accessories tab.
Valworx 550520 electric actuated stainless steel v-port valves are designed for applications requiring precise control. Factory-installed digital positioning kit for modulating control using a 4-20mA signal. Suitable for use with water, air, oil, and other media compatible with the materials of construction. Unique three piece investment cast bolted body design offers the advantage of a swing out body for easy inline maintenance. Standard unit is power-to-open and power to close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a flat gear system rotates the ball valve. The motor is stopped by internal cams striking micro switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position. High temperature valve mounting kit available for extended temperature range or wall mounting applications.
4- 20mA, normally closed (NC) control signal is standard. For 4- 20mA normally open (NO) or 0- 10V NC or NC please note in the Comments section on the Checkout page.
Ball Valve Standard Features
800 PSI working pressureDirect mounting valve per ISO5211Full port for unrestricted flow316 stainless steel body, ball and stemBlow out proof stemRTFE ball seats extend cycle lifeTriple PTFE/Viton stem seal design, live loaded
Electric Actuator Standard FeaturesHighly visible LED light gives continuous actuator status indicationMulti-voltage capable with auto-voltage sensingElectronic torque limiter - protects against valve jamsAnti-condensation heaterManual override with visual valve position indicatorAll electrical connections via external DIN plugs (included) - no need to remove coverTwo dry contact limit switches used to confirm open/closed valve positionRugged IP67 weatherproof housing, CE marked
Options (see Accessories tab)
| Type | Electric Actuated V-Port Ball Valve- Multivoltage w/ 4-20mA Positioner |
|---|
| Voltage | 24 to 240 Volts AC/DC (1 ph,50/60Hz) auto-voltage sensing |
|---|
| Power Consumption | 0.8A @ 115V, 0.5A @ 240V, 3.3A @ 24VAC
2.7A @ 24VDC (full load amps) |
|---|
| Cycle Time | 29 seconds per 90° rotation (+/- 10% no load) |
|---|
| Pipe Size | 2-1/2" NPT female |
|---|
| Port Size | V-Port, orifice 2.3 inches, Cv 26.2/61.0/135.0 Vertex Angle 30°/60°/90° |
|---|
| Pressure Rating | 800 PSI (see P/T chart),
25 PSI saturated steam with high temp kit, vacuum service to 29" Hg |
|---|
| Valve Temperature Range | -4 to 392 °F (-20 to 200 °C) |
|---|
| Actuator Temperature Range | -4 to 158 °F (-20 to 70 °C) |
|---|
| Valve Body | 316 Stainless Steel |
|---|
| Ball and Stem | 316 stainless steel |
|---|
| Ball Seats | RTFE (reinforced Teflon) |
|---|
| Stem Seals | PTFE/ Viton |
|---|
| Duty Cycle | 75% |
|---|
| Enclosure | Anti-corrosive polyamide, SS fasteners |
|---|
| Enclosure Rating | IP67 weatherproof, UV protection |
|---|
| Electrical Connections | DIN plugs with cable entry (included), optional 1/2" conduit plugs |
|---|
| Valve Position Confirmation | 2 x SPST limit switches 3A @ 125/250VAC, 30VDC resistive load |
|---|
| Manual Override | Hand knob |
|---|
| Motor Protection | Electronic over-torque with LED status light |
|---|
| Anti-Condensation Heater | 4 watts thermostatically controlled |
|---|
| Max Fluid Velocity | 10 feet per second |
|---|
V-Port Vertex Angle Options
Failsafe Battery Kit
Price: $633.60
Buy 3 or more for $570.24 each
Price: $633.60
Buy 3 or more for $570.24 each
Connectors & Cables
Price: $5.60
Buy 10 or more for $5.04 each
Price: $28.07
Buy 10 or more for $25.26 each
High Temperature Mounting Kit
Price: $120.00
Buy 3 or more for $108.00 each
Spring Check Valve
