Select the desired V-port vertex angle (30°, 60°, or 90°) from the Accessories tab.
Valworx 550506 electric actuated stainless steel v-port valves are designed for applications requiring precise control. Factory-installed digital positioning kit for modulating control using a 4-20mA signal. Suitable for use with water, air, oil, and other media compatible with the materials of construction. Unique three piece investment cast bolted body design offers the advantage of a swing out body for easy inline maintenance. Standard unit is power-to-open and power to close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a flat gear system rotates the ball valve. The motor is stopped by internal cams striking micro switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position. High temperature valve mounting kit available for extended temperature range or wall mounting applications.
4- 20mA, normally closed (NC) control signal is standard. For 4- 20mA normally open (NO) or 0- 10V NC or NC please note in the Comments section on the Checkout page.
Ball Valve Standard Features
1000 PSI working pressure (see P/T chart)Direct mounting valve per ISO5211Full port for unrestricted flow316 stainless steel body, ball and stemBlow out proof stemRTFE ball seats extend cycle lifeTriple RTFE/Viton stem seal design, live loaded
Electric Actuator Standard FeaturesHighly visible LED light gives continuous actuator status indicationMulti-voltage capable with auto-voltage sensingElectronic torque limiter - protects against valve jamsAnti-condensation heaterManual override with visual valve position indicatorAll electrical connections via external DIN plugs (included) - no need to remove coverTwo dry contact limit switches used to confirm open/closed valve positionRugged IP67 weatherproof housing, CE marked
Options (see Accessories tab)
Type | Electric Actuated V-Port Ball Valve- Multivoltage w/ 4-20mA Positioner |
Voltage | 24 to 240 Volts AC/DC (1 ph,50/60Hz) auto-voltage sensing |
Current Rating | 0.3A @ 110VAC, 0.16A @ 240VAC, 1.28A @ 24VAC 0.97A @ 24VDC (full load amps) |
Cycle Time | 9 seconds per 90° rotation (+/- 10% no load) |
Pipe Size | 3/4" NPT female |
Port Size | V-Port, orifice 0.8 inches, Cv 2.8/6.4/14.0 Vertex Angle 30°/60°/90° |
Pressure Rating | 1000 PSI (see P/T chart), 25 PSI saturated steam with high temp kit, vacuum service to 29" Hg |
Valve Temperature Range | -4 to 392 °F (-20 to 200 °C) |
Actuator Temperature Range | -4 to 158 °F (-20 to 70 °C) |
Valve Body | 316 Stainless Steel |
Ball and Stem | 316 stainless steel |
Ball Seats | RTFE (reinforced Teflon) |
Stem Seals | PTFE/ Viton |
Duty Cycle | 75% |
Enclosure | Anti-corrosive polyamide, SS fasteners |
Enclosure Rating | IP67 weatherproof, UV protection |
Electrical Connections | DIN plugs with cable entry (included), optional 1/2" conduit plugs |
Valve Position Confirmation | 2 x SPST auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load |
Manual Override | Hand knob |
Motor Protection | Electronic over-torque with LED status light |
Anti-Condensation Heater | 4 watts thermostatically controlled |
Max Fluid Velocity | 10 feet per second |
V-Port Vertex Angle Options
Failsafe Battery Kit
Price: $408.80
Buy 3 or more for $367.92 each
Price: $408.80
Buy 3 or more for $367.92 each
Connectors & Cables
Price: $5.60
Buy 10 or more for $5.04 each
Price: $14.64
Buy 10 or more for $13.18 each
Price: $29.62
Buy 10 or more for $26.65 each
Price: $22.42
Buy 10 or more for $20.17 each
High Temperature Mounting Kit
Price: $85.60
Buy 3 or more for $77.04 each
Spring Check Valve