Valworx 566747C compact electric actuated 3-way full port stainless steel ball valve is used to control the flow of water, air, oil, and other media compatible with the materials of construction. Use as an L-port diverter valve (directs flow from center inlet port to either side outlet port 1 or 2) or as a selector valve (two separate inlet ports and one center outlet port). Actuator uses power-to-open (position 2) and power-to-close (position 1), stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via an all metal gear drive rotates the ball one quarter turn. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position.
The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Two auxiliary limit switches are provided to confirm valve position.
High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Ball Valve Standard Features
1000 PSI working pressure (see P/T chart)Direct mounting valve per ISO5211Full port design316 stainless steel body, ball and stemFour ball seat design allows for Full Pressure at any portRTFE ball seats for extended cycle lifeTriple PTFE/Viton stem seal design, live loaded and adjustable
Electric Actuator Standard FeaturesQuarter turn operationRugged Type 4X weatherproof aluminum alloy housingVisual valve position indicatorManual overrideHeavy duty motor with overload protectionTwo auxiliary limit switches to confirm valve positionAll metal gear driveCSA Listed per UL429 and CSA C22.2, CE mark
Options (see Accessories tab)
Type | Electric Actuated 3 Way Valve- On/Off |
Voltage | 24VDC |
Current Rating | 0.7A (full load amps) |
Cycle Time | 11 seconds per 90° rotation (no load) |
Pipe Size | 3/4" NPT female |
Port Size | Full Port, Orifice 0.79 inches, Cv 18.9 |
Pressure (Max) | 1000 PSI (see P/T chart), 25 PSI saturated steam with high temp kit, vacuum up to 29inHg |
Valve Temperature Range | -4 to 392 °F (-20 to 200 °C) |
Actuator Temperature Range | -22 to +140 °F (-30 to +60 °C) |
Valve Body | 316 stainless steel |
Ball | 316 stainless steel |
Stem Seals | PTFE (Teflon)/FKM (Viton) |
Ball Seats | RTFE (reinforced Teflon) |
Duty Cycle | 60% |
Enclosure | Aluminum alloy, polyester painted, SS fasteners |
Enclosure Rating | Type 4X and IP67 weatherproof |
Electrical Connections | Prewired cable with flying leads 3 meter (9.8 feet) |
Valve Position Confirmation | 2 x SPST auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load |
Manual Override | 5mm hex drive with protective cover |
Motor Protection | Thermal overload |
Max Fluid Velocity | 10 feet per second |
High Temperature Mounting Kit
Price: $86.40
Buy 3 or more for $77.76 each
Spring Check Valve