Select the desired V-port vertex angle (30°, 60°, or 90°) from the Accessories tab.
Valworx 550504 electric actuated stainless steel v-port valves are designed for applications requiring precise control. Factory-installed digital positioning kit for modulating control using a 4-20mA signal. Suitable for use with water, air, oil, and other media compatible with the materials of construction. Unique three piece investment cast bolted body design offers the advantage of a swing out body for easy inline maintenance. Standard unit is power-to-open and power to close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a flat gear system rotates the ball valve. The motor is stopped by internal cams striking micro switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position. High temperature valve mounting kit available for extended temperature range or wall mounting applications.
4- 20mA, normally closed (NC) control signal is standard. For 4- 20mA normally open (NO) or 0- 10V (NC) please note in the Comments section on the Checkout page.
Flow direction: Open port side to V-port side
Ball Valve Standard Features
1000 PSI working pressure (see P/T chart)Direct mounting valve per ISO5211Full port for unrestricted flow316 stainless steel body, ball and stemBlow out proof stemRTFE ball seats extend cycle lifeTriple PTFE/Viton stem seal design, live loaded
Electric Actuator Standard FeaturesHighly visible LED light gives continuous actuator status indicationMulti-voltage capable with auto-voltage sensingElectronic torque limiter - protects against valve jamsAnti-condensation heaterManual override with visual valve position indicatorAll electrical connections via external DIN plugs (included) - no need to remove coverTwo dry contact limit switches used to confirm open/closed valve positionRugged IP67 weatherproof housing, CE marked
Options (see Accessories tab)
| Type | Electric Actuated V-Port Ball Valve- Multivoltage w/ 4-20mA Positioner |
|---|
| Voltage | 24 to 240 Volts AC/DC (1 ph,50/60Hz) auto-voltage sensing |
|---|
| Current Rating | 0.3A @ 110VAC, 0.16A @ 240VAC, 1.28A @ 24VAC
0.97A @ 24VDC (full load amps) |
|---|
| Cycle Time | 9 seconds per 90° rotation (+/- 10% no load) |
|---|
| Pipe Size | 1/2" NPT female |
|---|
| Port Size | V-Port, orifice 0.6 inches, Cv 2.4/5.5/6.9 Vertex Angle 30°/60°/90° |
|---|
| Pressure Rating | 1000 PSI (see P/T chart),
25 PSI saturated steam with high temp kit, vacuum service to 29" Hg |
|---|
| Valve Temperature Range | -4 to 392 °F (-20 to 200 °C) |
|---|
| Actuator Temperature Range | -4 to 158 °F (-20 to 70 °C) |
|---|
| Valve Body | 316 Stainless Steel |
|---|
| Ball and Stem | 316 stainless steel |
|---|
| Ball Seats | RTFE (reinforced Teflon) |
|---|
| Stem Seals | PTFE/ Viton (live loaded and adjustable) |
|---|
| Duty Cycle | 75% |
|---|
| Enclosure | Anti-corrosive polyamide, SS fasteners |
|---|
| Enclosure Rating | IP67 weatherproof, UV protection |
|---|
| Electrical Connections | DIN plugs with cable entry (included), optional 1/2" conduit plugs |
|---|
| Valve Position Confirmation | 2 x SPST auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load |
|---|
| Manual Override | Hand knob |
|---|
| Motor Protection | Electronic over-torque with LED status light |
|---|
| Anti-Condensation Heater | 4 watts thermostatically controlled |
|---|
| Max Fluid Velocity | 10 feet per second |
|---|
V-Port Vertex Angle Options
Failsafe Battery Kit
Price: $422.40
Buy 3 or more for $380.16 each
Price: $422.40
Buy 3 or more for $380.16 each
Connectors & Cables
Price: $5.60
Buy 10 or more for $5.04 each
Price: $16.24
Buy 10 or more for $14.62 each
Price: $42.02
Buy 10 or more for $37.81 each
Price: $36.92
Buy 10 or more for $33.23 each
High Temperature Mounting Kit
Price: $85.60
Buy 3 or more for $77.04 each
Spring Check Valve
