1-1/4" Surpass 3-Way Stainless T-Port Valve, 110 VAC, Safe Return

Valworx 592460 safe return 3-way stainless steel ball valve features the Surpass actuator, our most advanced actuator yet. Upon loss of power the actuator fails closed (factory setting). The unit can also be set to fail open or a to a user-defined position. Actuator will not operate until restoration of power and receipt of a new control signal. Used for on/off control of water, air, oil, and other media compatible with the materials of construction. These valves have a T-port diverter type flow path. The Surpass actuator can be programmed to operate in continuous mode (a signal pulse triggers continuous operation until full open or close) or inch mode (a signal pulse runs the motor for the duration of the pulse). Default is continuous mode.

Separate motor and control circuits for easier wiring and improved safety. Programmable end-of-stroke speed control to reduce/eliminate water hammer. Local control, capacitor state of charge and operating status via digital display.

The ball valve is direct mounted to the actuator using the international standard ISO5211 mounting pad. Rugged unique integral motor/housing design provides higher torque in a very small package. Actuators are tested to rigorous UL and CSA standards and certified by CSA. Anti-condensation heater is standard and will help protect actuator against damage caused by condensation.

High temperature valve mounting kit available for extended temperature range or wall mounting applications.

Ball Valve Standard Features

1000 PSI working pressure (see P/T chart)

Direct mounting valve per ISO5211

Full port design

316 stainless steel body, ball and stem

Four ball seat design allows for Full Pressure at any port

RTFE ball seats for extended cycle life

Triple PTFE/Viton stem seal design, live loaded and adjustable

Surpass Electric Actuator Standard Features

Super capacitor recharges in seconds

Charge status via digital display

Control and feedback cables for non-intrusive, simpler wiring

Dry contact control wiring

Rugged Type 4X weatherproof aluminum alloy enclosure

Local operation and valve status via digital display

Highly visible multi-color LED position indicator

100% duty cycle

Manual override

Heavy duty motor with over temp/over current/motor stall protection

Thermostatically controlled anti-condensation heater

Three programmable relays output 17 different status parameters (default is OPEN/CLOSE/FAULT)

Self-locking gear drive with no additional brake required

Standard ISO5211 multi-flange valve mounting

CSA Listed per UL429 and CSA C22.2, CE mark

BR>
Note: Factory setting is fail closed. For fail open or fail to position (x?) operation, specify in the comment section when ordering

Note: The safe return option returns the valve to a fail-safe position in the event of a loss of electrical power. It is not intended and should not be used for normal operation